Kyocera manual FS-C5020N16N and FS-C5030N Technology, Kyocera Intelligent Colour Technology ICT

FS-C5020N and FS-C5030N Product Guide

FS-C5020N16N and FS-C5030N Technology

Kyocera Intelligent Colour Technology (ICT)

ICT has three components: High-Speed Data Processing, High Speed Image Processing, and High-Image Quality.

High-Speed Data Processing

DDR SDRAM technology is the newly adopted memory method. Its data transfer speed is twice as fast as existing SDRAM technology, which contributes to the improvement of total print performance.

High Speed Image Processing

Improved RGB to CMYK colour conversion and image generation speed allows faster processing of files containing colour images.

High-Image Quality

Documents containing a mixture of text, graphics, charts, graphs, and photos are printed clearly and precisely because each unique page element is processed independently to provide the highest image quality possible.

Environment Adoption Stabilisation System (EASS)

Maintaining consistent image quality when utilising Advanced Beam Array technology is effortless with EASS. Fluctuations in environmental conditions such as temperature and humidity can cause image quality to “drift” resulting in the same image appearing differently when printed on two separate days. Kyocera includes sensors and developed unique technology to adjust toner concentration levels within the FS-C5020/30N, virtually guaranteeing consistent image quality regardless of environmental conditions.

Oil-Less Fusing

Newly developed polymerised toner eliminates the need for an Oil Roller, which reduces cost per print and service calls.

Colour Matching

With the FS-C5020N and FS-C5030N you can satisfy Colour matching requirements by using the Colour Tab in the KX Driver. (covered later in this guide) This function offers the ability to output a variety of ink and monitor simulations.

Colour Control

For those who want to make more refinements to image quality, users have the ability to make setting adjustments to Hue, Lightness, and Saturation within the KX Driver. In addition, Colour Reproduction Modes such as Picture Image, Text, Chart/Graphic, and four automatic modes can be specified within the Driver.

Automatic Colour Calibration

Another tool ensuring optimum image quality is Automatic Colour Calibration. Calibration takes place when the FS-C5020/30N is powered on, when the engine has been inactive, and during long print runs to maintain colour quality and consistency. It can also be user requested at any time from the Control Panel. When the FS-C5020/30N is calibrating, a Control Panel message states: “Please Wait (Calibrating)”. The process is very brief, and is done to ensure that the quality of Page 1 is as good as Page 3,001.

- 20 -