Kyocera manual FS-C5020N16N and FS-C5030N Controller, Firmware Version and Release Date, Memory

FS-C5020N and FS-C5030N Product Guide

FS-C5020N16N and FS-C5030N Controller

Following is a brief overview of each area. For additional details please review the FS-C5020N or FS-5030N User Manuals.

Firmware Version and Release Date

This area shows the version and release date of the Printer firmware.

Hardware Information

Here you will find information for the Paper Drawers and MPT such as: the number of drawers, and the size and type of the paper installed. This area will also list Printer settings, such as Buzzer OFF/On, the Host Buffer Size, the Sleep Timer, and FormFeed Time Out Settings.

Page Information

This area displays the Number of Copies and Total Page Count and whether Tone Mode is Normal or Fine.

Network Status

This area lists the IP Address, Subnet Mask, and default Gateway, information for the installed Network Interface Card.

Memory

This area states the total memory installed, available memory space, and the current status of the RAM Disk.

Installed Options

This area lists whether the HDD, Option ROM, and Memory Card are installed.

Emulation

This area shows available emulations for the FS-C5020N or the FS-C5030N (PCL 6 is the factory default). The emulations are: PCL 6, KPDL3, KC-GL.

Error Log

The last three errors, listed in order of occurrence, will be displayed here. The most recent error will appear on the topmost line of the Log. Error information is cleared when the printer is powered off.

Consumable Status

This area displays the approximate level of remaining toner. When the Toner Counter states 100, the container is full. The closer the level gets to zero, the emptier the toner cartridge becomes.

Interfaces

This area displays the standard and optional installed interfaces: Parallel, Network, USB and Option.

- 28 -