Mitsubishi Electronics LCD1760VM user manual Figure R.4, English-7

Page 8

English

Figure R.4

NOTE: This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).

Replace screws

Thickness of bracket (arm)

2.0 ~ 3.2 mm

Tighten all screws

100 mm

4 SCREWS

(MAX depth: 8.5 mm) If use other screw, check depth of hole.

Weight of LCD assembly: 4.7kg (MAX)

English-7

Image 8

Contents MultiSync LCD1760VM User’s ManualDeclaration of the Manufacturer DeclarationEnglish For the Customer to use in U.S.A. or Canada Declaration of ConformityCanadian Department of Communications Compliance Statement FCC InformationEnglish-3 ContentsQuick Start Figure A.1 Figure B.1Figure B.2 Figure D.1Raise and Lower Monitor Screen Tilt and SwivelRemove Monitor Stand for Mounting Figure F.1Figure R.1 Figure R.2 Figure R.3 English-6Figure R.4 English-7Auto Adjust Analog input only ControlsOSM On-Screen-Manager Controls SoundPosition Controls Analog input only Colour Control SystemsLEFT/RIGHT DOWN/UPOSM Warning ToolsInformation English-11 Recommended useSafety Precautions and Maintenance Ergonomics English-12Specifications Monitor SpecificationsMultiSync LCD1760VM Monitor English-13Features English-14Troubleshooting TCO’99 Why do we have environmentally labelled computers?What does labelling involve? Environmental Requirements Flame retardants