Mitsubishi Electronics EX53E How to use the administration screen continued, English, EN-27

How to use the administration screen (continued)

Changing the network settings

•For the setting items, ask your network administrator.

1.Click "Network Setup".

2.Change the settings, then click the [Apply] button.

•You can change the following settings.

Settings		Contents
		•	If the projector is connected to a DHCP
			network, select "Obtain an IP address
			automatically".
		•	If the projector is used with a static IP,
IP Setup			select "Use the following IP address:", and
			then specify the values for "IP Address",
			"Subnet Mask", and "Default Gateway".
		• You cannot specify prohibited IP addresses
			such as 0.0.0.0 and 255.255.255.255.
		•	If the projector is connected to computers,
			it functions as a server and can assign IP
			addresses to the computers. If you want
			the projector to assign IP addresses, select
			"Auto".
		•	If you select "Auto", select "Obtain an IP
DHCP Server Setup			address automatically" for the TCP/IP set-
			tings in the computer.
		•	The range in which the IP addresses are
			assigned is displayed in "Start IP" and
			"End IP". These IP addresses are changed
			automatically if the IP address of the pro-
			jector is changed.
		•	You can choose "Enable" or "Disable" for
			"Wireless LAN". If you selected "Disable"
			for "Wireless LAN", you can enable it again
			by connecting using Wired LAN or perform-
			ing NETWORK RESET in the WIRELESS
			menu of the projector.
		•	You can specify a value of 14 digits that fol-
Wireless Setup			low "Wireless Projector" as a SSID.
		•	If you enable "SSID Broadcast", you can
			search "Wireless Projector" automatically.
			Also, you can disable "SSID Broadcast" for
			security improvement. If you selected "Dis-
			able" for "SSID Broadcast", you can enable
			it again by connecting using Wired LAN or
			performing NETWORK RESET in the
			WIRELESS menu of the projector.
		•	The model for North America has 11 chan-
			nels, and that for Europe has 13 channels.
			If you select "Auto", you can select a chan-
	Channel		nel, which is in an optimum radio wave
			environment, from the above channels.
		•	If the radio wave environment is poor dur-
			ing use, switch to another channel manu-
			ally.
		•	You can improve security for the wireless
			communication by encrypting it between
			the projector and computers.
		•	If you use the WEP function, select 128-bit
			(ASCII: 13 characters), 64-bit (ASCII: 5
	WEP		characters), 128-bit (Hex: 26 digits), or 64-
			bit (Hex: 10 digits). Specify a key according
			to the number of the characters/digits.
		•	You are required to enter the above speci-
			fied key when connecting the projector
			wirelessly. Enter the specified key.

ENGLISH

•When using multiple units of the wireless projector, do not overlap the settings for "SSID" in "Wireless Setup".

3.Check the displayed settings, then click the [OK] button.

4.Reboot the system.

•The specified settings can be applied.

•It takes approximately one minute to reboot the system.

EN-27