Mitsubishi Electronics EX53E, EX53U INSTALLATION menu, Menu operation continued, English, EN-33

Menu operation (continued)

2. INSTALLATION menu

Menu option		Setting				Feature description
	OFF/BEIGE				/ LIGHT
	BLUE		/ LIGHT			Selects a desired setting based on the color of the screen or wall on
						which images are projected. (See page 17.) When selecting a setting
WALL SCREEN	GREEN			/ PINK
						/
						other than BLACK BOARD/WHITE BOARD, you can fine-tune the color
	BLACK BOARD/WHITE
	BOARD					tone to the desired level on the 1 to 5 scale.
	STANDARD					Select this setting when you want to view images in a well-lit room.
						Select this setting when you want to view images at a moderate light
LAMP MODE						intensity. The operating sound is consequently reduced, and the lamp
	LOW					lifetime becomes longer.
						• When this mode is switched, projected images may flicker.
						• If this mode is frequently switched, the lamp may be deteriorated.
						When this mode is set to ON, the lamp is automatically lit when the
						power cord is plugged in the wall outlet. Select ON when you set the
AUTO POWER ON	ON/OFF					projector at the ceiling.
						• When the lamp is off, the projector is in standby. Use the remote
						control to turn on the lamp.
AUTO POWER OFF	OFF/5-60 min					Selects a desired timer setting until the projector enters the standby
						mode when there is no signal input from the source.
IMAGE CAPTURE						Use this menu to capture the screen for the splash screen.
SPLASH SCREEN	ON/OFF					Select ON to display the splash screen when the projector is powered on.
						• You can edit the splash screen.
						Selects the background color that is displayed when there is no signal
BACK COLOR	BLUE/BLACK/IMAGE					input from the source. When IMAGE is selected, the splash screen is
						displayed.
AV MUTE MODE	BLACK/IMAGE					Selects the background that is displayed when the AV MUTE button is
						pressed. When IMAGE is selected, the splash screen is displayed.

	opt.		ENGLISH
INSTALLATION
	WALL SCREEN	BEIGE
	LAMP MODE	STANDARD
	AUTO POWER	OFF
	ON
	AUTO POWER	OFF
	OFF
	IMAGE	GO
	CAPTURE
ON	SPLASH	ON
	SCREEN
	BACK COLOR	BLUE
	MUTE MODE	BLACK
	IMAGE	OFF
	REVERSE

OFF

Select this setting when you want to view images from the front with the projector set on the floor.

MIRROR

Select this setting when you want to view images from behind the screen with the projector set on the floor.

IMAGE REVERSE

INVERT

Select this setting when you want to view images from behind the screen with the projector set at the ceiling.

MIRROR INVERT

Select this setting when you want to view images from the front with the projector set at the ceiling.

•By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.

•You cannot select IMAGE CAPTURE SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu is set to SPLASH ID SCREEN, as the password lock is activated.

•When you keep projecting images with BACK COLOR or AV MUTE MODE set to IMAGE for an extended period of time, an afterimage may lin- ger on the screen.

•When the wireless connection is selected, "AUTO POWER OFF" is not enabled.

EN-33