Preparing the Remote Control
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
1 Slide the battery compartment cover (located on the bottom of the remote control) and pull off.
2 Insert the batteries to match the “+” and
3 (A) Leaving a little space in the front, close the lid, (B) then with the back pressed tightly,
(C) press the lid towards the front.
(A)
(C)
CAUTION
When replacing batteries, purchase two of the same type of AAA battery.
Heed the regulations in effect in your region on the disposal of spent batteries.
Remote Control Range
(B)
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Top View
Remote control sensor
40°
40°
Side View
Remote control infrared transmitter
Remote control infrared transmitter
40° | Remote control |
| sensor |
40° | 50° |
| 30° |
| 20° |
| 10° |
5m / 16.4 feet
7m / 16.4 feet
5m / 16.4 feet
7m / 16.4 feet
Note
*Exposure of the main unit’s remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation.
*The remote control will not function when the battery is exhausted.