PLUS Vision U7-132HSF Mount the new lamp cartridge, Mount the lamp cover, Reset the Lamp Timer

Page 63

Replacing the Lamp Cartridge

4 Mount the new lamp cartridge.

(1)Place the lamp cartridge with its socket facing to the left and push it in slowly.

(Line it up with the screw holes in the projector.)

(2)Turn the two lamp cartridge screws clockwise to tighten them.

5 Mount the lamp cover.

(1)Set the tip of the lamp cover in place, then close the lamp cover.

(2) Turn the lamp cover’s screw clockwise to tighten it.

6 Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.

Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-56.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the U7-132SF/U7-132hSF/U7-137SF for a replacement lamp. Indicate you need a U7-300 replacement lamp for the U7-132SF/U7-132hSF/U7-137SF (order code 28-057).

E-63

Image 63

Contents U7-137SF U7 132SF/U7 132hSF DOC Compliance Notice PrecautionsLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Miscellaneous Adjustments and SettingsTable of Contents Menu OperationsChecking the Supplied Accessories Power cable 1.8 m / 5.9 feetAudio cable Mini plug, 2 m / 6.6 feet Terminal cover cord Checking the Supplied AccessoriesUSB cable type A, 2 m / 6.6 feet Cable pocketBuilt-in Security Slot Names of the Main Unit PartsStatus indicator E-22 Precautions Handling of the Remote Control Names of the Remote Control PartsPreparing the Remote Control Remote Control RangeInserting the Batteries Procedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuidePersonal Computers with a DVI Connector Connections with Personal ComputerDVI-D cable Available as an option. Order code Personal Computers with a Mini D-Sub 15-Pin Connector Connecting Personal Computers and Video EquipmentRGB signal cable Supplied item Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo cable Suppled item Video cable Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsConnections with Component Signals Adapter Connections with Audio ConnectorsAudio cable Supplied item Audio conversionConnections with the RGB OUT Connector Switch on the projector power OperatingButton on main unit Cursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableZoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenLowering the projection image Making Adjustments with the AdjustersFocus ring Raising the projection imageAutomatic Adjustment of Analog RGB General OperationInput Selection Freezing a Moving Picture Cancelling Video and Audio TemporarilyAdjustment of the Volume Press the Cancel button to immediately close the displayEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button Connecting the computer and projectorClick button on back JOG buttonsCN-2 D-Sub 9-pin side Connecting via a LAN U7-137SF onlyControlling the Projector from a Computer RS-232C connectionsProtecting the Projector with the Security Lock Changing the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordVolume Using the Quick MenuContent of Adjustments and Settings Press the Select or button to adjustNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Operation Method Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation RGB Terminal Menu name Item Name Sub Menu SetupPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessImage ResetFine Picture PositionGamma Select the preset color modeColor Quick Color AdjColor Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Aspect Personal Computer SignalVideo Signals ViewView Vertical Flip / Horizontal FlipKeystone Keystone SaveMenu Position SetupAuto Power Off Auto SourceInput Format Lamp ModeSetup Status IndicatorTo start the timer Presentation TimerBackground OptionLanguage On ScreenOption Network PasswordStartup Screen Security LockStatus Factory DefaultLamp Timer Reset InfoResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Blinking Indicator status What you should doThermal Protector Check the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Unplug the power cord Remove the lamp cover Replacing the Lamp CartridgeRemove the lamp cartridge Reset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Mechanical SpecificationsOptical ElectricalDigital Analog SignalResolution Frequency Video Table of Supported FrequenciesCabinet Dimensions 2005