PLUS Vision U7-132SF, U7-132HSF, U7-137SF user manual Connections with Component Signals

Page 19

Connecting Personal Computers and Video Equipment

Connections with Component Signals

When the Video Equipment Has a YCbCr Connector or YPbPr Connector

•When connecting the computer to the projector’s RGB connector, connect using a separately sold component cable.

•The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo- nent” using the menu sequence of [Setup] → [Input Format] → [RGB].

See “Input Format” on Page E-52.

•When making connections with the DVI connector of the projector, please make the connection via the supplied DVI/mini D- Sub 15-pin conversion adapter.

•The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo- nent” using the menu sequence of [Setup] → [Input Format] → [DVI].

See “Input Format” on Page E-52.

•This projector automatically distinguishes the YCbCr input signal and the YPbPr input signal and projects it.

When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or another color, change the setting under the menu of [Color] → [Color Space].

See “Color Space” on Page E-47.

•Press the RGB button for input selection using the remote control.

Component cable (Available as an option)

Order code: 28-690

DVI/mini D-Sub 15-pin conversion	Green
adapter (Suppled item)	Green
	Blue
	Red

Y Cb Cr

COMPONENT

COMPONENT

Y Pb Pr

DVI/mini D-Sub 15-pin conversion
adapter (Suppled item)	Green
	Blue
	Red

Component cable (Available as an option)

Order code: 28-690

Projecting component signals

Please note that when inputting 480i or 576i signals using a separately sold component cable and viewing video images, depending on the connected device and the video source being projected, the picture may be disturbed or may not be projected properly.

In such cases, it is possible to achieve a picture with no disturbance that is projected properly by either switching to 480p signals or connecting using an S-Video cable instead.

Note

In some rare cases, the picture may not be displayed, depending on the connected device.

E-19

Image 19

Contents U7-137SF U7 132SF/U7 132hSF DOC Compliance Notice PrecautionsLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Miscellaneous Adjustments and SettingsTable of Contents Menu OperationsPower cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesAudio cable Mini plug, 2 m / 6.6 feet Terminal cover cord Checking the Supplied AccessoriesUSB cable type A, 2 m / 6.6 feet Cable pocketBuilt-in Security Slot Names of the Main Unit PartsStatus indicator E-22 Precautions Handling of the Remote Control Names of the Remote Control PartsRemote Control Range Preparing the Remote ControlInserting the Batteries Procedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal Computers with a DVI ConnectorDVI-D cable Available as an option. Order code Connecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorRGB signal cable Supplied item Manufacturer Model Key To Output the External Output Signal of a Notebook ComputerVideo cable Suppled item Video cable Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsConnections with Component Signals Adapter Connections with Audio ConnectorsAudio cable Supplied item Audio conversionConnections with the RGB OUT Connector Operating Switch on the projector powerButton on main unit Cursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageFinishing Unplug the power cableZoom ring Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenLowering the projection image Making Adjustments with the AdjustersFocus ring Raising the projection imageGeneral Operation Automatic Adjustment of Analog RGBInput Selection Freezing a Moving Picture Cancelling Video and Audio TemporarilyAdjustment of the Volume Press the Cancel button to immediately close the displayImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button Connecting the computer and projectorClick button on back JOG buttonsCN-2 D-Sub 9-pin side Connecting via a LAN U7-137SF onlyControlling the Projector from a Computer RS-232C connectionsProtecting the Projector with the Security Lock Changing the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordVolume Using the Quick MenuContent of Adjustments and Settings Press the Select or button to adjustNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Operation Method Menu Screen Names and FunctionsMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation RGB Terminal Menu name Item Name Sub Menu SetupPicture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessImage ResetFine Picture PositionGamma Select the preset color modeColor Quick Color AdjColor Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Aspect Personal Computer SignalVideo Signals ViewView Vertical Flip / Horizontal FlipKeystone Keystone SaveMenu Position SetupAuto Power Off Auto SourceInput Format Lamp ModeSetup Status IndicatorTo start the timer Presentation TimerBackground OptionLanguage On ScreenOption Network PasswordStartup Screen Security LockStatus Factory DefaultLamp Timer Reset InfoLamp Timer Resolution / FrequencyInfo Indicator status What you should do When an Indicator is Lit or BlinkingThermal Protector Check the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Replacing the Lamp Cartridge Unplug the power cord Remove the lamp coverRemove the lamp cartridge Mount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Mechanical SpecificationsOptical ElectricalDigital Analog SignalResolution Frequency Video Table of Supported FrequenciesCabinet Dimensions 2005