PLUS Vision V-339 user manual General Operation, Input Selection, Automatic Adjustment

Page 25

General Operation

This section describes the use of direct operation with the main unit or remote control buttons.

For information about operation using the menu, see “Menu Operation Method” on Page E-33 and the various items on Pages E-40 to E-53.

Input Selection

This operation selects the input signal to be projected.

Main unit operation: Press the SOURCE button.

(It will not function while the menu or the quick menu is displayed.)

When Auto Source is On

Whenever the SOURCE button is pressed, the projector automatically selects another source that has the next input signal.

When Auto Source is Off

The input selection condition used last time will be set.

Each press of the button moves the selection one step in the sequence of RGB → Video → S-Video. Note that the various input signals will become the signal type set with [Input Format] See “Input Format” on page E-49.

Remote control operation: Press the desired input selection button.

RGB button

Switches the RGB input.

VIDEO button

The input switches between Video and S-Video each time the button is

 

pressed.

When Auto Source is On

When an input signal is not present at the selected source, the projector automati- cally selects the next source that has an input signal.

E

 

C

A

R

U

U

T

O

O

S

 

STANDBY

MENU

RGB

ENTER

VIDEO CANCEL

QUICK

Q

FREEZE MUTE ECO AUTO

1 2 3 4

ASPECT

VOL KSTN ZOOM TIMER

When Auto Source is Off

The projector switches to the selected source regardless of whether an input sig- nal is present.

Note:

*When you do not operate source selection, the projector will assume the input selec- tion condition that was previously used.

*See “Auto Source” on Page E-47 for information about the Auto Source on and off conditions.

Automatic Adjustment

This function automatically adjusts the position shift, screen size, vertical stripes, and color infidelity of the projected analog RGB input signal.

Normally automatic adjustment is performed at the time of signal selection.

Main unit operation/Remote control operation: Press the AUTO button.

(This will not function while the menu or the quick menu is displayed.) A press of the AUTO button starts the automatic adjustment.

Note:

*If the display position is shifted, vertical lines appear on the picture, or the projection is not good even after using automatic adjustment, please perform image adjustment manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page E-40.

*When the image extends beyond the boundaries of the screen or is smaller than the screen, set Aspect to “Auto”. See “Selection of Aspect Ratio” on Page E-25 and “As- pect” on Page E-45.

E

 

C

A

R

U

U

T

O

O

S

 

STANDBY

MENU

RGB

ENTER

VIDEO CANCEL

QUICK

Q

FREEZE MUTE ECO AUTO

1 2 3 4

ASPECT

VOL KSTN ZOOM TIMER

E-24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 339 Declaration of Conformity DOC Compliance Notice PrecautionsPower Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Built-in Security Slot Names of the Main Unit PartsZoom ring E-22 Built-in security slotNames of the Main Unit Parts Remote control sensor E-11Precautions Handling of the Remote Control Names of the Remote Control PartsButton Battery Replacement Preparing the Remote ControlRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal computer RGB signal cable Supplied itemConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Ferrite core Supplied itemConnections with Component Signals Connections with the Audio Jack Switch on the power of the connected equipment Switch on the projector powerOperating Projector is now capable of regular projectionPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorFinishing Unplug the power cableButton on main unit Unplug & Go functionAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Auto Keystone FunctionAdjuster button Making Adjustments with the AdjustersFocus ring Raising the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Lamp Mode Cancelling Video and Audio TemporarilySelection of the Color Mode DCM Freezing a Moving PictureAdjustment of the Volume Keystone Manual AdjustmentThis function adjusts the volume of the built-in speaker Press the or VOL button to adjust the volumeImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Press the Enter button and start the timer Using the Presentation TimerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Canceling the password/Changing the password Input the password using the number buttons 1 toCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Screen Names and Functions Adjustment Bar and Settings ContentsMenu Operation Method Menu Name Cursor Deep BlueMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation View ColorOption Menu name Item Name Sub Menu SetupInfo Image Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionFine Picture ResetPosition ImageColor Dual Color ModeGamma Color Temp Selection contents at the time of YPbPr inputWhite Color SpaceWhite Balance View Video SignalsAspect FilterKeystone Vertical Flip / Horizontal FlipAuto Keystone ViewAuto Power Off SetupAuto Source Menu Position SetupThis function sets the display position of the menu Volume Presentation TimerTo start the timer Input FormatLanguage OptionOn Screen BackgroundSecurity Lock Startup ScreenOption Lamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Digital AnalogCabinet Dimensions 2005

V-339 specifications

The PLUS Vision V-339 is a sophisticated document camera designed for educational and professional environments. This device stands out for its ability to provide high-quality imagery and enhanced functionality that cater to various presentation and teaching needs.

One of the main features of the PLUS Vision V-339 is its high-resolution imaging capability. The camera supports resolutions up to 1920 x 1080 (Full HD), ensuring that both fine details and large texts are captured with clarity. This feature is particularly beneficial for educators and professionals who need to display intricate diagrams, textbooks, and other detailed materials during presentations or lectures.

The V-339 incorporates advanced image processing technologies that optimize the quality of the visuals being displayed. The automatic focus feature allows users to quickly and effortlessly adjust for the best possible image clarity, while the built-in illumination ensures that lighting conditions do not compromise visibility. This is especially advantageous in classrooms or meeting rooms where ambient light levels can vary.

Another notable aspect of the PLUS Vision V-339 is its versatile connectivity options. It is equipped with USB and HDMI outputs, enabling seamless integration with various devices such as projectors, monitors, and computers. This makes it easy to share content with a larger audience, enhancing the overall effectiveness of presentations.

Additionally, the camera features a flexible arm that allows for a wide range of positioning possibilities. Users can easily maneuver the camera to capture images from different angles or to show materials from various distances, making it an excellent tool for dynamic presentations.

The PLUS Vision V-339 is also designed for user-friendliness. It comes with intuitive controls that make it simple for anyone to operate, regardless of technical expertise. The plug-and-play setup ensures that users can quickly start their presentations without the need for extensive configuration.

Robust and portable, the V-339 is ideal for both stationary use in classrooms and mobility for off-site presentations. Its compact design along with its lightweight frame makes it convenient for educators and professionals on the go.

In conclusion, the PLUS Vision V-339 document camera combines high-resolution imaging, user-friendly controls, versatile connectivity, and portability, making it an essential tool for effective communication, teaching, and presentations in various settings. Its blend of advanced features and practicality sets a new standard for document cameras in the educational and professional realms.
Top Page Image Contents