PLUS Vision V-339 user manual Precautions, DOC Compliance Notice

Page 3

IMPORTANT SAFETY INFORMATION

Precautions

Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future reference.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

The above cautions are given on the bottom of the product.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COM- PONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED PLUS SERVICE PERSONNEL.

RF Interference

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorientate or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula- tions.

Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.

E-2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 339 Declaration of Conformity DOC Compliance Notice PrecautionsLamp Replacement InstallationPower Supply CleaningMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Built-in security slot Names of the Main Unit PartsBuilt-in Security Slot Zoom ring E-22Names of the Main Unit Parts Remote control sensor E-11Precautions Handling of the Remote Control Names of the Remote Control PartsUsing the remote control for the first time Preparing the Remote ControlButton Battery Replacement Remote Control RangeProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal computer RGB signal cable Supplied itemTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Ferrite core Supplied item Connections with Composite SignalsVideo Equipment with Video Connectors Video Equipment with S-VIDEO ConnectorsConnections with Component Signals Connections with the Audio Jack Projector is now capable of regular projection Switch on the projector powerSwitch on the power of the connected equipment OperatingCursor Power Cable Connections and Switching the Power On/OffPress the Enter button to set This completes the selection of the display languageUnplug & Go function Unplug the power cableFinishing Button on main unitAuto Keystone Function Adjustment of the Projection ScreenAdjustment of the Projection Screen Adjust the projection image to the screenRaising the projection image Making Adjustments with the AdjustersAdjuster button Focus ringGeneral Operation Automatic AdjustmentWhen Auto Source is On When Auto Source is OffVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Freezing a Moving Picture Cancelling Video and Audio TemporarilyLamp Mode Selection of the Color Mode DCMPress the or VOL button to adjust the volume Keystone Manual AdjustmentAdjustment of the Volume This function adjusts the volume of the built-in speakerEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Moving the Position of the Timer Display Using the Presentation TimerPress the Enter button and start the timer Timer DisplayProtecting the Projector with the Security Lock Changing the password Input the password using the number buttons 1 toCanceling the password/Changing the password Canceling the passwordContent of Adjustments and Settings Using the Quick MenuNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Name Cursor Deep Blue Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Operation MethodMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation View ColorMenu name Item Name Sub Menu Setup OptionInfo Picture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentImage Brightness / Contrast / Color / Tint / SharpnessImage ResetFine Picture PositionDual Color Mode ColorGamma Color Space Selection contents at the time of YPbPr inputColor Temp WhiteWhite Balance Filter Video SignalsView AspectView Vertical Flip / Horizontal FlipKeystone Auto KeystoneSetup Auto Power OffAuto Source Setup Menu PositionThis function sets the display position of the menu Input Format Presentation TimerVolume To start the timerBackground OptionLanguage On ScreenStartup Screen Security LockOption Status Factory DefaultLamp Timer Reset InfoResolution / Frequency Lamp TimerInfo Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingDirty Lens CleaningCleaning a Soiled Projector Main Unit Cleaning the Inside of the ProjectorReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Mechanical SpecificationsOptical ElectricalDigital Analog SignalResolution Frequency Video Table of Supported FrequencyCabinet Dimensions 2005

V-339 specifications

The PLUS Vision V-339 is a sophisticated document camera designed for educational and professional environments. This device stands out for its ability to provide high-quality imagery and enhanced functionality that cater to various presentation and teaching needs.

One of the main features of the PLUS Vision V-339 is its high-resolution imaging capability. The camera supports resolutions up to 1920 x 1080 (Full HD), ensuring that both fine details and large texts are captured with clarity. This feature is particularly beneficial for educators and professionals who need to display intricate diagrams, textbooks, and other detailed materials during presentations or lectures.

The V-339 incorporates advanced image processing technologies that optimize the quality of the visuals being displayed. The automatic focus feature allows users to quickly and effortlessly adjust for the best possible image clarity, while the built-in illumination ensures that lighting conditions do not compromise visibility. This is especially advantageous in classrooms or meeting rooms where ambient light levels can vary.

Another notable aspect of the PLUS Vision V-339 is its versatile connectivity options. It is equipped with USB and HDMI outputs, enabling seamless integration with various devices such as projectors, monitors, and computers. This makes it easy to share content with a larger audience, enhancing the overall effectiveness of presentations.

Additionally, the camera features a flexible arm that allows for a wide range of positioning possibilities. Users can easily maneuver the camera to capture images from different angles or to show materials from various distances, making it an excellent tool for dynamic presentations.

The PLUS Vision V-339 is also designed for user-friendliness. It comes with intuitive controls that make it simple for anyone to operate, regardless of technical expertise. The plug-and-play setup ensures that users can quickly start their presentations without the need for extensive configuration.

Robust and portable, the V-339 is ideal for both stationary use in classrooms and mobility for off-site presentations. Its compact design along with its lightweight frame makes it convenient for educators and professionals on the go.

In conclusion, the PLUS Vision V-339 document camera combines high-resolution imaging, user-friendly controls, versatile connectivity, and portability, making it an essential tool for effective communication, teaching, and presentations in various settings. Its blend of advanced features and practicality sets a new standard for document cameras in the educational and professional realms.
Top Page Image Contents