PLUS Vision V-339 user manual Replacing the Lamp Cartridge

Page 58

Replacing the Lamp Cartridge

•The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is about 1500 hours (when used in normal mode only). This could be shortened depending on conditions of use and other factors.

Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from test conditions at this company.)

•When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the replacement following the procedure below.

•If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode and no longer turns on.

•Contact a store that sells the V-339 for a replacement lamp. Indicate you need a V-123 replacement lamp for the V-339 (order code 28-059).

CAUTION

•Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop, disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will cause burns because of the high temperature.

•Do not remove any screws other than those specified.

•Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.

•If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased.

E-57

Page 57 Page 59
Image 58
Page 57 Page 59
Contents 339 Declaration of Conformity Precautions DOC Compliance NoticeCleaning InstallationPower Supply Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Zoom ring E-22 Names of the Main Unit PartsBuilt-in Security Slot Built-in security slotRemote control sensor E-11 Names of the Main Unit PartsNames of the Remote Control Parts Precautions Handling of the Remote ControlRemote Control Range Preparing the Remote ControlButton Battery Replacement Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors Ferrite core Supplied itemConnections with Component Signals Connections with the Audio Jack Operating Switch on the projector powerSwitch on the power of the connected equipment Projector is now capable of regular projectionThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorButton on main unit Unplug the power cableFinishing Unplug & Go functionAdjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Auto Keystone FunctionFocus ring Making Adjustments with the AdjustersAdjuster button Raising the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationSelection of Aspect Ratio Video Signals / Component SignalsGeneral Operation Selection of the Color Mode DCM Cancelling Video and Audio TemporarilyLamp Mode Freezing a Moving PictureThis function adjusts the volume of the built-in speaker Keystone Manual AdjustmentAdjustment of the Volume Press the or VOL button to adjust the volumeImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Timer Display Using the Presentation TimerPress the Enter button and start the timer Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Canceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Operation Method Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewOption Menu name Item Name Sub Menu SetupInfo Brightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionPosition ResetFine Picture ImageColor Dual Color ModeGamma White Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance Aspect Video SignalsView FilterAuto Keystone Vertical Flip / Horizontal FlipKeystone ViewAuto Power Off SetupAuto Source Menu Position SetupThis function sets the display position of the menu To start the timer Presentation TimerVolume Input FormatOn Screen OptionLanguage BackgroundSecurity Lock Startup ScreenOption Info Factory DefaultLamp Timer Reset StatusLamp Timer Resolution / FrequencyInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Electrical SpecificationsOptical MechanicalTable of Supported Frequency SignalResolution Frequency Video Digital AnalogCabinet Dimensions 2005

V-339 specifications

The PLUS Vision V-339 is a sophisticated document camera designed for educational and professional environments. This device stands out for its ability to provide high-quality imagery and enhanced functionality that cater to various presentation and teaching needs.

One of the main features of the PLUS Vision V-339 is its high-resolution imaging capability. The camera supports resolutions up to 1920 x 1080 (Full HD), ensuring that both fine details and large texts are captured with clarity. This feature is particularly beneficial for educators and professionals who need to display intricate diagrams, textbooks, and other detailed materials during presentations or lectures.

The V-339 incorporates advanced image processing technologies that optimize the quality of the visuals being displayed. The automatic focus feature allows users to quickly and effortlessly adjust for the best possible image clarity, while the built-in illumination ensures that lighting conditions do not compromise visibility. This is especially advantageous in classrooms or meeting rooms where ambient light levels can vary.

Another notable aspect of the PLUS Vision V-339 is its versatile connectivity options. It is equipped with USB and HDMI outputs, enabling seamless integration with various devices such as projectors, monitors, and computers. This makes it easy to share content with a larger audience, enhancing the overall effectiveness of presentations.

Additionally, the camera features a flexible arm that allows for a wide range of positioning possibilities. Users can easily maneuver the camera to capture images from different angles or to show materials from various distances, making it an excellent tool for dynamic presentations.

The PLUS Vision V-339 is also designed for user-friendliness. It comes with intuitive controls that make it simple for anyone to operate, regardless of technical expertise. The plug-and-play setup ensures that users can quickly start their presentations without the need for extensive configuration.

Robust and portable, the V-339 is ideal for both stationary use in classrooms and mobility for off-site presentations. Its compact design along with its lightweight frame makes it convenient for educators and professionals on the go.

In conclusion, the PLUS Vision V-339 document camera combines high-resolution imaging, user-friendly controls, versatile connectivity, and portability, making it an essential tool for effective communication, teaching, and presentations in various settings. Its blend of advanced features and practicality sets a new standard for document cameras in the educational and professional realms.
Top Page Image Contents