PLUS Vision V-339 Using the Presentation Timer, Use the and Select buttons to set the time

Page 30

General Operation

Using the Presentation Timer

The presentation is given while checking the timer displayed on the screen.

The gauge display allows the remaining time to be known at a glance.

(1)Press the TIMER button to show the settings display. The display will close when an operation has not been made for about 10 seconds.

[Timer settings display]

Press the CANCEL button to close the display immediately.

(2)Use the ￿ and ￿ SELECT buttons to set the time.

The setting contents are “Off” and from 10 to 60 minutes (in

10-minute intervals)

Settings can also be made with the SELECT (￿￿) buttons.

(3)Press the ENTER button and start the timer.

•The display of the timer setting will close, the display of the timer will appear and simultaneously the timer will start.

Gauge (Blue)

[Timer Display]

STANDBY

 

 

MENU

(2)

 

ENTER

 

RGB

 

 

VIDEO

CANCEL

 

QUICK

CANCEL button

 

 

Q

(3)

 

 

 

FREEZE

MUTE

ECO

AUTO

1

2

3

4

 

 

 

ASPECT

VOL

KSTN

ZOOM

TIMER

 

 

 

(1)

The blue gauge indicates the remaining time. When the gauge disappears,the time is up.

The gauge continues to be displayed when the timer is stopped.

When the remaining time is “0” (Gray)

•Press the ENTER button to restart the timer. The timer will start with the same time setting.

•Press the CANCEL button to close the timer display. The timer setting will return to “Off”.

Moving the Position of the Timer Display

The SELECT (￿￿￿￿) buttons on the remote control permit move- ment within the movable range of the timer display.

Movable Range of the Timer Display

Note:

*The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will still be operating at such times. Also, the timer will not be displayed unless a signal is being input.

*While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.

E-29

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 339 Declaration of Conformity Precautions DOC Compliance NoticeCleaning InstallationPower Supply Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Zoom ring E-22 Names of the Main Unit PartsBuilt-in Security Slot Built-in security slotRemote control sensor E-11 Names of the Main Unit PartsNames of the Remote Control Parts Precautions Handling of the Remote ControlRemote Control Range Preparing the Remote ControlButton Battery Replacement Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors Ferrite core Supplied itemConnections with Component Signals Connections with the Audio Jack Operating Switch on the projector powerSwitch on the power of the connected equipment Projector is now capable of regular projectionThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorButton on main unit Unplug the power cableFinishing Unplug & Go functionAdjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Auto Keystone FunctionFocus ring Making Adjustments with the AdjustersAdjuster button Raising the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Selection of the Color Mode DCM Cancelling Video and Audio TemporarilyLamp Mode Freezing a Moving PictureThis function adjusts the volume of the built-in speaker Keystone Manual AdjustmentAdjustment of the Volume Press the or VOL button to adjust the volumeEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Timer Display Using the Presentation TimerPress the Enter button and start the timer Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Canceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Operation Method Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Brightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionPosition ResetFine Picture ImageDual Color Mode ColorGamma White Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance Aspect Video SignalsView FilterAuto Keystone Vertical Flip / Horizontal FlipKeystone ViewSetup Auto Power OffAuto Source Setup Menu PositionThis function sets the display position of the menu To start the timer Presentation TimerVolume Input FormatOn Screen OptionLanguage BackgroundStartup Screen Security LockOption Info Factory DefaultLamp Timer Reset StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Electrical SpecificationsOptical MechanicalTable of Supported Frequency SignalResolution Frequency Video Digital AnalogCabinet Dimensions 2005

V-339 specifications

The PLUS Vision V-339 is a sophisticated document camera designed for educational and professional environments. This device stands out for its ability to provide high-quality imagery and enhanced functionality that cater to various presentation and teaching needs.

One of the main features of the PLUS Vision V-339 is its high-resolution imaging capability. The camera supports resolutions up to 1920 x 1080 (Full HD), ensuring that both fine details and large texts are captured with clarity. This feature is particularly beneficial for educators and professionals who need to display intricate diagrams, textbooks, and other detailed materials during presentations or lectures.

The V-339 incorporates advanced image processing technologies that optimize the quality of the visuals being displayed. The automatic focus feature allows users to quickly and effortlessly adjust for the best possible image clarity, while the built-in illumination ensures that lighting conditions do not compromise visibility. This is especially advantageous in classrooms or meeting rooms where ambient light levels can vary.

Another notable aspect of the PLUS Vision V-339 is its versatile connectivity options. It is equipped with USB and HDMI outputs, enabling seamless integration with various devices such as projectors, monitors, and computers. This makes it easy to share content with a larger audience, enhancing the overall effectiveness of presentations.

Additionally, the camera features a flexible arm that allows for a wide range of positioning possibilities. Users can easily maneuver the camera to capture images from different angles or to show materials from various distances, making it an excellent tool for dynamic presentations.

The PLUS Vision V-339 is also designed for user-friendliness. It comes with intuitive controls that make it simple for anyone to operate, regardless of technical expertise. The plug-and-play setup ensures that users can quickly start their presentations without the need for extensive configuration.

Robust and portable, the V-339 is ideal for both stationary use in classrooms and mobility for off-site presentations. Its compact design along with its lightweight frame makes it convenient for educators and professionals on the go.

In conclusion, the PLUS Vision V-339 document camera combines high-resolution imaging, user-friendly controls, versatile connectivity, and portability, making it an essential tool for effective communication, teaching, and presentations in various settings. Its blend of advanced features and practicality sets a new standard for document cameras in the educational and professional realms.
Top Page Image Contents