PLUS Vision HE-3100 Operation with the Remote Control, Turning on Power/STANDBY, Light in green

Page 22

Operation with the Remote Control

Point the remote control toward the remote control sensor of the main unit and operate.

ASPECT button

This button selects the vertical and horizontal ratio of the screen of the input video.

These buttons are used for the selection of the input signal.

For further information about input selection. VIDEO button

This switches the input to the VIDEO signal. S-VIDEO button

This switches the input to the S-VIDEO signal. YCbCr button

This switches the input to the Y Cb Cr signal. DVI button

This switches the input to the DVI-D signal.

ON/STANDBY

ASPECT

VIDEO S-VIDEO YCbCr DVI

MENU

SET

ESC

ON/STANDBY button

This button is used to switch ON the power and set the unit to the STANDBY mode.

These buttons are used for menu opera- tions.

→Page E-24 "Using the On-Screen Menu"

MENU button

This is used in the selection of the menu name when displaying the menu on the projection screen.

ESC button

This is used when closing the menu.

SET button

This is used to set the menu items.

Cursor buttons (← → ↑ ↓ )

These are used in the selection of the menu name, item name, and contents.

Turning ON Power/STANDBY

Press the POWER button of the main unit and turn on the main power.

To turn on the power:

Check that the POWER/ indicator of the main unit is lit or- ange.

Press the ON/STANDBY button for about 2 seconds.

ON/STANDBY

The power will be switched on, the indicator will flash green (for one minute) and then the indicator will be lit green. The projec- tion screen will brighten in about 40 seconds.

Light in green

POWER/ STATUS

Power ON

Note: To save electrical power when not using the unit, switch off the main power. When doing so, wait until the flashing orange indicator is lit steadily.

Setting standby mode:

Press and hold down the ON/STANDBY button for about 2 sec- onds.

The indicator will flash orange (for 60 seconds) and then be lit orange.

Light in orange

POWER/ STATUS

Standby

Attention!

When switching off the main power or disconnecting the power cord

First press ON/STANDBY button of the remote control or the main unit to set the standby mode (in which the indicator will be lit orange) and then switch off the main power. If the main power of the main unit is switched off without setting the standby mode, this could shorten the life of the lamp or possibly cause damage due to the heat of the lamp.

E – 22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents English Important Safety Information Important Safety Instructions Major Features High Image QualityTable of Contents Accessories Check Names of the Main Unit Parts → Page E-39 ON/STANDBY buttonNames of the Main Unit Parts Theft Prevention LockE-16 Ventilation outflow hole Using the Storage Case Attaching the Supplied AdjustersNames of the Remote Control Parts Remote Control Range Preparing the Remote ControlInserting the Batteries Procedure Up to Projecting to the Screen Connect the video equipment and personal computerPlacement Guide Projection Distance and Screen SizePower Cord Connections Power Cord ConnectionsConnecting Video Equipment and Personal Computers Connections with Video and S-VIDEO ConnectorsConnections with YCbCr Connectors Connecting Video Equipment and Personal ComputersCheck the following before making connections Connection with DVI-D ConnectorTable of Supported Frequencies Turning on or OFF Main Power Turning on or OFF Main PowerTurning on or OFF Power Projection Screen Position Adjustment Adjustment of the Projection ScreenFocus Adjustment Adjustment of the Projection Screen Press the Source button and select the desired connectorThis completes the projection screen adjustments Input SelectionSelect Select FullSelect 169 LB Select ThruTurning on Power/STANDBY Operation with the Remote ControlLight in green Press the desired input selection button Operation with the Remote ControlWhen DVI is selected and DVI No Signal is Selected aspect ratio for each input is storedUsing the On-Screen Menu Names and functions of the buttons used in menu operationsSelection of the Menu Name Making Adjustments and SettingsDisplay of the Menu Selection of the Item NameSub menu items ExitPress the ESC button and close the menu display Menu List SetupPicture Info OptionMenu List Adjusting the Picture Video Adjustments PictureColor Temperature Adjusting the White BalanceVideo Filter Input Video Adjustments PictureProScan Mode Zoom FilterPan Input Video Adjustments Picture Video Signal Color System SettingsColor System Installation SetupKeystone Mode / Keystone Adjustment of Keystone DistortionAuto Standby Settings Auto Power OffBackground Color Settings LED Display SettingsMenu Position On-Screen Display Settings OptionLanguage DurationUser Memory Resetting, Storing, and Information InfoSaving and Loading of Video Adjustments SavingReturning to Standard Settings DefaultLamp Timer Reset Resetting the Lamp TimerTroubleshooting Check the following matters before requesting servicingWhen the Status Indicator Is Lit/Flashes Thermal ProtectorLamp cover Replacing the Lamp CartridgeLamp cartridge Plug This completes the lamp replacementGroove Cleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensSpecifications Ntsc 3.58, Ntsc 4.43, PAL, PAL N, PAL M, PAL60, SecamMain Unit External View

HE-3100 specifications

The PLUS Vision HE-3100 is a state-of-the-art projector that offers a perfect blend of advanced features and user-friendly technology, making it an ideal choice for both professional presentations and home theater experiences. This versatile device stands out in the crowded projector market due to its impressive specifications and remarkable picture quality.

One of the main features of the HE-3100 is its high resolution of 1920 x 1080 pixels, providing full HD visuals that enhance clarity and detail. This makes it suitable for displaying intricate charts, vibrant images, and clear text, ensuring that your audience remains engaged. The projector uses DLP technology, which leverages a digital micromirror device to produce sharp images with excellent color accuracy.

The brightness of the HE-3100 is another highlight, with an impressive luminous output of up to 3500 ANSI lumens. This high brightness level allows for the projector to perform well in various lighting conditions, including well-lit conference rooms or even outdoor settings, ensuring that images remain visible and vibrant.

In terms of connectivity, the HE-3100 supports a multitude of input options. It comes equipped with HDMI, VGA, USB, and audio outputs, allowing users to easily connect laptops, streaming devices, and more. This versatility ensures that you can display content from virtually any compatible device, making it an excellent choice for both business and educational environments.

The projector also features a long-lasting lamp life of up to 10,000 hours in eco mode, reducing maintenance costs and the frequency of replacements. This aspect is particularly beneficial for organizations that rely on projectors for frequent use.

The HE-3100 is designed to be user-friendly, with straightforward setup and operation. The intuitive interface allows users to navigate through settings effortlessly, while keystone correction and lens shift features help to ensure that images are aligned and properly positioned.

In conclusion, the PLUS Vision HE-3100 is a robust projector that caters to a variety of needs with its high resolution, bright output, extensive connectivity options, and user-friendly features. Its longevity and efficiency make it an excellent investment for anyone seeking a reliable projection solution.
Top Page Image Contents