PLUS Vision HE-3100 user manual Replacing the Lamp Cartridge, Lamp cover, Lamp cartridge

Page 40

Replacing the Lamp Cartridge

⬛After the lamp has been operating for 1000 hours or longer, the STATUS indicator will light and the message "Replace The Lamp" will appear on the screen. Should this happen, turn off the projector and replace the lamp cartridge with a new one.

The projector will not turn on after 1100 hours.

⬛Obtain a replacement lamp cartridge at the store where the projector was purchased. Please specify the following information when ordering a replacement lamp cartridge: Unit model number: HE-3100L for the exclusive use of HE-3100

Part number: 27-050.

NOTE: The projector lamp has its usable life. The rated lamp life is about 1000 hours. How- ever, it may become shorter depending on the conditions of usage.

(The rated lamp life is the average life of the lamps produced and tested, under the test con- ditions of our company, for a long term.)

CAUTION

Follow these steps before replacing the lamp cartridge:

Press the ON/STANDBY button on the remote control to turn off the power. The POWER/ indicator will change to steady light in green from flashing in amber.

Press the POWER button on the projector cabinet turn off the projector. Unplug the power cord.

Wait at least 60 minutes for the lamp cartridge to cool.

DO NOT TOUCH THE LAMP CARTRIDGE immediately after it has been used. It will be extremely hot.

⬛Do not remove any screws except for those mentioned in the instructions below.

⬛Do not touch the lamp. Doing so may shorten the lamp life.

⬛The lamp may explode if improperly mishandled.

⬛If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store where the projector was purchased.

Preparation: Unplug the projector. Prepare the new lamp cartridge and a plus-headed screwdriver.

Lay a soft cloth sheet underneath the projector with its upside down to prevent scratches.

1

Remove the lamp cover.

qLoosen the lamp cover screw until it turns freely. w Remove the lamp cover.

2

Remove the lamp cartridge.

Lamp cover

q Loosen the lamp cartridge screw until it turns freely.

w Hold the handle of the lamp cartridge and then pull out the lamp cartridge.

Lamp cartridge

E – 40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents English Important Safety Information Important Safety Instructions Major Features High Image QualityTable of Contents Accessories Check Names of the Main Unit Parts → Page E-39 ON/STANDBY buttonNames of the Main Unit Parts Theft Prevention LockE-16 Ventilation outflow hole Using the Storage Case Attaching the Supplied AdjustersNames of the Remote Control Parts Remote Control Range Preparing the Remote ControlInserting the Batteries Procedure Up to Projecting to the Screen Connect the video equipment and personal computerPlacement Guide Projection Distance and Screen SizePower Cord Connections Power Cord ConnectionsConnecting Video Equipment and Personal Computers Connections with Video and S-VIDEO ConnectorsConnections with YCbCr Connectors Connecting Video Equipment and Personal ComputersCheck the following before making connections Connection with DVI-D ConnectorTable of Supported Frequencies Turning on or OFF Main Power Turning on or OFF Main PowerTurning on or OFF Power Projection Screen Position Adjustment Adjustment of the Projection ScreenFocus Adjustment Press the Source button and select the desired connector This completes the projection screen adjustmentsAdjustment of the Projection Screen Input SelectionSelect Full Select 169 LBSelect Select ThruTurning on Power/STANDBY Operation with the Remote ControlLight in green Operation with the Remote Control When DVI is selected and DVI No Signal isPress the desired input selection button Selected aspect ratio for each input is storedUsing the On-Screen Menu Names and functions of the buttons used in menu operationsMaking Adjustments and Settings Display of the MenuSelection of the Menu Name Selection of the Item NameSub menu items ExitPress the ESC button and close the menu display Menu List SetupPicture Info OptionMenu List Video Adjustments Picture Color TemperatureAdjusting the Picture Adjusting the White BalanceInput Video Adjustments Picture ProScan ModeVideo Filter Zoom FilterPan Input Video Adjustments Picture Video Signal Color System SettingsColor System Setup Keystone Mode / KeystoneInstallation Adjustment of Keystone DistortionAuto Power Off Background Color SettingsAuto Standby Settings LED Display SettingsOn-Screen Display Settings Option LanguageMenu Position DurationResetting, Storing, and Information Info Saving and Loading of Video AdjustmentsUser Memory SavingDefault Lamp Timer ResetReturning to Standard Settings Resetting the Lamp TimerTroubleshooting Check the following matters before requesting servicingWhen the Status Indicator Is Lit/Flashes Thermal ProtectorLamp cover Replacing the Lamp CartridgeLamp cartridge Plug This completes the lamp replacementGroove Cleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensSpecifications Ntsc 3.58, Ntsc 4.43, PAL, PAL N, PAL M, PAL60, SecamMain Unit External View

HE-3100 specifications

The PLUS Vision HE-3100 is a state-of-the-art projector that offers a perfect blend of advanced features and user-friendly technology, making it an ideal choice for both professional presentations and home theater experiences. This versatile device stands out in the crowded projector market due to its impressive specifications and remarkable picture quality.

One of the main features of the HE-3100 is its high resolution of 1920 x 1080 pixels, providing full HD visuals that enhance clarity and detail. This makes it suitable for displaying intricate charts, vibrant images, and clear text, ensuring that your audience remains engaged. The projector uses DLP technology, which leverages a digital micromirror device to produce sharp images with excellent color accuracy.

The brightness of the HE-3100 is another highlight, with an impressive luminous output of up to 3500 ANSI lumens. This high brightness level allows for the projector to perform well in various lighting conditions, including well-lit conference rooms or even outdoor settings, ensuring that images remain visible and vibrant.

In terms of connectivity, the HE-3100 supports a multitude of input options. It comes equipped with HDMI, VGA, USB, and audio outputs, allowing users to easily connect laptops, streaming devices, and more. This versatility ensures that you can display content from virtually any compatible device, making it an excellent choice for both business and educational environments.

The projector also features a long-lasting lamp life of up to 10,000 hours in eco mode, reducing maintenance costs and the frequency of replacements. This aspect is particularly beneficial for organizations that rely on projectors for frequent use.

The HE-3100 is designed to be user-friendly, with straightforward setup and operation. The intuitive interface allows users to navigate through settings effortlessly, while keystone correction and lens shift features help to ensure that images are aligned and properly positioned.

In conclusion, the PLUS Vision HE-3100 is a robust projector that caters to a variety of needs with its high resolution, bright output, extensive connectivity options, and user-friendly features. Its longevity and efficiency make it an excellent investment for anyone seeking a reliable projection solution.
Top Page Image Contents