PLUS Vision HE-3100 Adjustment of the Projection Screen, Projection Screen Position Adjustment

Adjustment of the Projection Screen

Operations include the adjustment of the image position that is projected to the screen and the adjustment of the focus as well as the input selection and the selection of the aspect ratio.

Perform these operations with the power of the connected equipment switched on and the video signal input to the projector.

6 Projection Screen Position Adjustment

Adjust the projection image to the screen

1 (1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of the lens of the main unit.)

(2)If the image is shifted vertically, move the image up or down with the adjuster.

(3)A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the screen. Set the projector so that it is pointing straight toward the screen.

(4) If the image shows keystone distortion, adjust using menu operations. → Page E-33 "Adjustment of Keystone Distortion"

(2)

(4)

(1) (3)

Using the Adjusters

To lower the projection position:

Raise the rear adjusters up

To raise the projection position:

Attach the supplied two adjusters to the front feet. See page E-9 "Attaching the Supplied Adjusters".

After folding the rear adjusters, rotate the right/left front ad- juster to fine-adjust the height. (Adjustable range: 0 to 5 mm/ 0 to 0.2 inch)

7 Focus Adjustment

2 Turn the FOCUS ring and adjust the focus.

SUTATS

YBDNA T S /NO

/R

EW

O

P

ECRUO

S

TC

EP

S

A

E – 19