Microsoft PXP43 manual Integrated Peripherals

Chapter 3: Using BIOS 31

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

Integrated Peripherals

Onboard SATAMode
	Enhanced
Onboard LAN Function	Enabled
Onboard LAN Boot ROM	Disabled
Onboard AUDIO Function	Enabled
Serial Port1 Address	3F8/IRQ4
USB Functions	Enabled
Legacy USB Support	Enabled
On Chip SATA2 Controller	Enabled

Help Item

Options

Disabled

Compatible

Enhanced

mn< >	:Move Enter : Select	+/-/: Value	F10: Save ESC: Exit
	F1: General Help	F9: Load Default settings

Onboard SATA Mode (Enhanced)

Use this item to select the mode of the Serial ATA.

Onboard LAN Function (Enabled)

Use this item to enable or disable the onboard LAN function.

Onboard LAN Boot ROM (Disabled)

Use this item to enable or disable the booting from the onboard LAN or a network add-in card with a remote boot ROM installed.

Onboard AUDIO Function (Enabled)

Use this item to enable or disable the onboard Audio function.

Serial Port1 Address (3F8/IRQ4)

Use this item to enable or disable the onboard COM1 serial port, and to assign a port address.

USB Functions (Enabled)

Use this item to enable or disable the USB function.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices.

On Chip SATA2 Controller (Enabled)

This item allows you to enable or disable the onchip Serial ATA controller.

Press <Esc> to return to the main menu setting page.

Using BIOS