Microsoft PXP43 manual PCI / PnP Setup, Resume By PS2 KB S3 Disabled, Resume By PS2 MS S3 Disabled

Chapter 3: Using BIOS 33

Resume By PS2 KB (S3) (Disabled)

This item enables or disables you to allow keyboard activity to awaken the system from S3 mode.

Resume By PS2 MS (S3) (Disabled)

This item enables or disables you to allow mouse activity to awaken the system from S3 mode.

Resume on RTC Alarm (Disabled)

The system can be turned off with a software command. If you enable this item, the system can automatically resume at a fixed time based on the system’s RTC (realtime clock). Use the items below this one to set the date and time of the wake-up alarm. You must use an ATX power supply in order to use this feature.

Press <Esc> to return to the main menu setting page.

PCI / PnP Setup

This page sets up some parameters for devices installed on the PCI bus and those utilizing the system plug and play capability.

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

PCI / PnP Setup

Init Display First PCI

Help Item

Select which graphics controller to use as the primary boot device.

mn< >	:Move Enter : Select	+/-/: Value	F10: Save ESC: Exit
	F1: General Help	F9: Load Default settings

Init Display First (PCI)

Use this item to select which graphics controller to use as the primary boot devices. Press <Esc> to return to the main menu setting page.

Using BIOS