Microsoft PXP43 Supervisor Password Not Installed, Change Supervisor Password Press Enter

Chapter 3: Using BIOS 37

Load Default Settings

This option opens a dialog box to ask if you are sure to install optimized defaults or not. You select [OK], and then <Enter>, the Setup Utility loads all default values; or select [Cancel], and then <Enter>, the Setup Utility does not load default values.

Supervisor Password

This page helps you install or change a password.

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

Supervisor Password

Supervisor Password	:Not Installed
Change Supervisor Password
		Press Enter

Help item

Install or Change the password.

mn< >	:Move Enter : Select	+/-/: Value	F10: Save ESC: Exit
	F1: General Help	F9: Load Default settings

Supervisor Password (Not Installed)

This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays.

Change Supervisor Password (Press Enter)

You can select this option and press <Enter> to access the sub menu. You can use the sub menu to change the supervisor password.

Press <Esc> to return to the main menu setting page.

Using BIOS