Microsoft K7S5A, mainboard manual Installing the Mainboard Safety Precautions, Quick Guide

Page 9

Chapter 2

Installing the Mainboard

Safety Precautions

Follow these safety precautions when installing the mainboard:

∙Wear a grounding strap attached to a grounded device to avoid damage from static electricity.

∙Discharge static electricity by touching the metal case of a safely grounded object before working on the mainboard.

∙Leave components in the static-proof bags they came in.

∙Hold all circuit boards by the edges. Do not bend circuit boards.

Quick Guide

This Quick Guide suggests the steps you can take to assemble your system with the mainboards.

The following table provides a reference for installing specific components:

Locating Mainboard Components

Go to page 4

Installing the Mainboard in a Case

Go to page 6

Setting Jumpers

Go to page 6

Installing Case Components

Go to page 8

Installing the CPU

Go to page 10

Installing Memory

Go to page 11

Installing an HDD and CD-ROM Drive

Go to page 13

Installing an FDD

Go to page 14

Installing Add-on Cards

Go to page 15

Connecting Options

Go to page 16

Connecting Peripheral (I/O) Devices

Go to page 18

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Copyright PrefaceDeclaration of Conformity Table of Contents Using the Mainboard Software Checklist Introducing the Mainboard IntroductionStandard Items Scheme FeaturesROM Choosing a Computer CaseMainboard Components Quick Guide Installing the Mainboard Safety PrecautionsInstalling the Mainboard in a Case Checking Jumper SettingsSetting Jumpers Jumper Settings Checking Jumper SettingsConnecting Case Components SPK1 Speaker ConnectorJP2 Onboard LAN LED Connections FPI Connector Installing the Processor Installing HardwareBefore installing the Processor CPU Installation ProcedureFollow these instructions to install the CPU Installing Memory ModulesDDR Sdram Module Installation ProcedureInstalling a Hard Disk Drive Installing a Hard Disk Drive/CD-ROMAbout IDE Devices About UltraDMAInstalling a CD-ROM/DVD Drive Installing a Floppy Diskette DriveFollow these instructions to install an add-on card Installing Add-on CardsConnecting Optional Devices USB1 Extended USB header FPAUD1O Front panel MIC/Speaker Out headerConnecting I/O Devices WOL1 Wake On LANIR1 Infrared port LPT1 External Connector Color CodingThis concludes . The next chapter covers the Bios Standard Configuration Using Bios About the Setup UtilityUsing Bios Running the Setup UtilityBios Navigation Keys Amibios Simple Setup Utility VersionDate & Time Standard Cmos FeaturesPri Master/Pri Slave/Sec Master/Sec Slave Floppy Drive A/Floppy Drive BAdvanced Setup Boot to OS/2 64MB Password CheckSystem Bios Cacheable Timing Setting ModePower Management Setup PCI / Plug and Play Setup Load Optimal Settings Load Best Performance SettingsFeatures Setup Onboard Parallel Port Parallel Port ModeParallel Port IRQ Parallel Port DMACPU Brand/Type/ Core Voltage/Ratio /Frequency CPU PnP SetupCPU Speed Dram FrequencySystem / CPU Temperature Hardware MonitorVoltage Measurements & FAN Speeds Change Password Change or Remove the PasswordExit Auto-installing under Windows Using the Mainboard Software About the Software CD-ROMSetup Tab Application TabRead Me Tab Running Setup Manual Installation AMI Flash Memory Utility Utility Software ReferenceWinFlash Utility MediaRing Talk Telephony SoftwareCD Ghost Recovery GeniusLanguage Genius PageABC
Top Page Image Contents