2Open the carrier flat. Insert a 4x5 chrome or negative so that the left edge is against the positioning pins. Position the film so the image is
Note: The emulsion side is the dull side.
Pins
3Close the carrier. Squeeze the carrier at the bottom edge and turn the knob to lock it.
English 11
The 120 Film Adapters
(for 2 1/4 x 21/4 and 2 1/4 x 2 3/4 in. film)
1Open the 4x5 carrier as described previously.
2Locate the appropriate adapter for your image. One is
designed for 2 1/4 x 2 3/4 in. images, and one is for 2 1/4 x 2π in. square images.
Note: The frame of film must be cut from the film strip in order to be scanned.
3Orient the adapter so that the words THIS SIDE UP (on the adapter) face up, and the notches are at the left edge. Place the unmounted film over the opening, within the raised ridges of the adapter. Position the film so the image is right-
reading and
3