Polaroid 45 Ultra quick start Connect the Scanner to, Computer, Set the Scanner Scsi Address

4 Connect the Scanner to

Power Mac or PowerPC Windows 95, 98 or NT

the Computer

The SprintScan 45 Ultra requires a SCSI host adapter in your computer. If your computer does not have an adapter, you must install one (see page 17). If your computer is a PC-compatible with a SCSI adapter, but the adapter is connected to a hard drive or CD-ROM drive, installing a second adapter is recommended.

Set the Scanner SCSI Address

1Run the Apple System Profiler program, usually on the Apple menu. If not, it may be available from www.apple.com/ swupdates.

2Click Devices and Volumes to view the SCSI device addresses.

Look at the address switch on each SCSI device connected to your system. If necessary, see the instructions provided with the devices.

Each device connected to a SCSI host adapter must have a unique address from 0-6. To assure a unique address for the scanner, determine the addresses of any other SCSI devices.

Make sure the scanner is turned off and set the address switch (b on page 7) to a value not used by any other device.

Note: The address is preset to 4. Do not change it unless another device is using 4. Other addresses typically available are 2, 5, and 6.

English 6