Polaroid 45 Ultra quick start Set Termination

25	50	25		50
pins	pins		pins		pins

Computer	Other SCSI device					Scanner
	(unterminated)				(termination on)
25	50	25			50
pins	pins		pins	pins

Computer	Scanner	Other SCSI device
	(termination off)	(terminated)

You may need additional cables or adapters to connect the scanner. Your cable must have a 50-pin Centronics M or DB-25 M connector at one end for attachment to the scanner, and the cable should be as short as possible. To determine the connector you need for attachment to your SCSI adapter, refer to instructions with the adapter.

Set Termination

Terminate the scanner and all other SCSI devices as shown in the appropriate cabling diagram to the left or on page 7. The last device in the SCSI chain must be terminated (or termination on), while all other devices must be unterminated (or termination off).

Set scanner termination with the termination switch (d on page 7). On = terminated, Off = unterminated.

Termination instructions for your other SCSI devices are provided with the devices.

English 8