Nokia 12 GSM MODULE REMOTE I/O manual Input Settings

Page 23

Characters accepted in aliases are defined in chapter 7.

Note: If an alias is defined, the default command will be disabled. There can be only one effective command or alias for each function at a time. An alias must not be equal to a default command.

Empty aliases cannot be used. If an empty alias is set, the default command will remain effective.

Note: The alias string must be unique and the maximum length is 24 characters. Neither commands nor aliases are case sensitive. However, the message identifier and password are.

5.4INPUT SETTINGS

Figure 7 shows a dialog (File -> Module Configuration -> Input Settings) where you can configure analog input settings with Configurator.

The Nokia 12 GSM Module has separate digital and analog inputs. You can set high and low limits to the analog input pins. The pin can be in the normal or alarm mode. If the information is continuous, use inputs 1-3.

The input sampling interval indicates the period for which the Nokia 12 GSM Module polls the input state. The sampling interval value ranges from 1 to 60 seconds.

For control messages querying input states or values, see Chapter 9.3.2.

You can subscribe to text message alarms as response messages. This is done using control messages described in Chapter 9.3.3.

As a default, the alarm message is sent once to the number where the alarm was subscribed. Alternatively, the alarm can be sent continuously. In this case, alarm messages are sent when alarm conditions are met, until the alarm subscription is cancelled (see Chapter 9.3.3). To configure the alarm sequence, select “Continuously” or “Once” in the Input Settings dialog.

In analog input, or if device data is continuous, an alarm can be set to be triggered when a limit is crossed. Configurator requires the high and low limits as millivolts (0 … 2800 mV) and the sampling interval as seconds (1-60 s).

Control messages for subscribing an alarm or alarms are described in chapter 9.3.3.

Note: It is mandatory to set input high and low limit values in the analog mode.

Note: The number to which alarm messages are sent can only be defined by subscribing to an alarm. After the subscription, the alarm will be sent as a response to the number where the alarm was subscribed. Thus, the number cannot be defined with Configurator.

19/49

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Nokia 12 GSM Module Contents Page Legal Notice Acronyms and Terms About this Document Functions in the Remote I/O control IntroductionGeneral Remote I/O ControlPage Security Page Getting Started Setting UP the Configurator EnvironmentMandatory Settings Connecting a Device or a MachineDefining the Message Identifier Reading and Writing ParametersUser Control Mode dialog Short Messages dialog Setting the SMS Centre Address12/49 Disabling Acknowledgements Optional ConfigurationsGeneral settings Authorised numbers Security SettingsSecurity settings Authentication Aliasing Setting aliases for device commands Input Settings Input settings Default Output Value Setting21/49 INPUT/OUTPUT PIN Descriptions PIN descriptions Port settings in Configurator Supported Characters Characters supported by Configurator for Remote I/O controlCommand Syntax List of commands Remote I/O Control SMS CommandsCommands Status Messages List of response messages Detailed Command Information and ResponsesChanging the Password Changepword OK Commands for the password controlReading Inputs Changepword FailedInputget X OK InputGet X commandsInputget ALL OK INPUT1 YSubscribing to Input Alarms InputGetChange commands for alarm functionality Inputgetchange Z InputchangecancelReading Outputs Output X Y OutputGet X commandsWriting Outputs Outputget X OKOutputSet X commands Outputinvert X OK Output X Y OutputInvert X commandsInverting Outputs Output 7 Output 8 Output 9 Output PulsesOutputpulse X OFF OutputPulse X commandsOutputpulse X on Output X LockedOutput Pulse OFF time Error Network Time Missing Cancelling Output PulsesOutput X Pulse Cancelled OutputPulseCancel X commandsOutputpulsecancel Term123 Outputpulse 1 on 5s Location information GPS support configured to serial portBbbbbbbbb Longitude LocationgetLocation Location LatitudeNetwork Support Safety InformationVehicles AntennaMedical Devices Potentially Explosive Environments Care and Maintenance49/49

12 GSM MODULE REMOTE I/O specifications

The Nokia 12 GSM Module Remote I/O stands out as a robust solution for remote monitoring and control in various applications. Designed to seamlessly integrate cellular connectivity with remote input and output functionalities, this module is particularly valuable in industries such as utilities, transportation, and industrial automation.

One of the primary features of the Nokia 12 GSM Module is its GSM connectivity, allowing it to operate over existing cellular networks. This connectivity ensures reliable communication across vast distances, making it an ideal choice for remote locations where traditional networking options are impractical. With support for both 2G and 3G networks, the module caters to diverse geographical requirements, providing flexibility depending on regional infrastructure.

The module supports multiple I/O configurations, including digital and analog inputs and outputs. This versatility enables users to monitor various sensors and control different devices remotely. For instance, it can process data from temperature sensors, pressure gauges, and flow meters while allowing remote control of pumps, valves, and other actuators. This combination of input/output capabilities simplifies the integration into existing systems.

Another notable characteristic of the Nokia 12 GSM Module is its built-in power management features. The module is designed to operate efficiently, utilizing low standby power, which is particularly important for battery-powered applications. This efficiency not only extends the lifespan of power sources but also reduces operational costs, making it a cost-effective solution over time.

Advanced security features are also a hallmark of the Nokia 12 GSM Module. It employs encryption protocols to safeguard data transmissions, protecting sensitive information from unauthorized access. This emphasis on security is essential in industries where data integrity and privacy are paramount.

The module is engineered for rugged environments, boasting a wide temperature operating range and resistance to humidity and dust. Its durable construction ensures that it remains operational in challenging conditions, thereby enhancing its reliability for outdoor or industrial use.

Adding to its capabilities, the Nokia 12 GSM Module can be easily interfaced with various cloud platforms. This compatibility enables real-time data reporting and remote access, empowering users to monitor their systems from anywhere in the world.

In summary, the Nokia 12 GSM Module Remote I/O is a comprehensive solution that provides GSM connectivity, versatile I/O options, energy efficiency, robust security, and durability. These features make it a valuable instrument for enhancing operational efficiency and enabling advanced automation in remote applications.
Top Page Image Contents