Nokia 12 GSM MODULE REMOTE I/O manual General settings

Page 18

Figure 4. General settings

If you select the Disable acknowledgements option, only response messages to acknowledgement messages are disabled. The following will not be disabled:

•Status messages; responses to input state or value queries

•Indication messages, for example, responses to timed commands (see Chapter 9.3.7)

•Alarm messages; responses to alarm subscriptions (see Chapters 5.4 and 9.3.3)

•Error messages that are sent, for example, in response to a control message with the correct message identifier and password, but with the wrong command

14/49

Image 18

Contents Nokia 12 GSM Module Contents Page Legal Notice Acronyms and Terms About this Document Remote I/O Control IntroductionGeneral Functions in the Remote I/O controlPage Security Page Setting UP the Configurator Environment Getting StartedConnecting a Device or a Machine Mandatory SettingsReading and Writing Parameters Defining the Message IdentifierUser Control Mode dialog Setting the SMS Centre Address Short Messages dialog12/49 Optional Configurations Disabling AcknowledgementsGeneral settings Security Settings Authorised numbersSecurity settings Authentication Aliasing Setting aliases for device commands Input Settings Default Output Value Setting Input settings21/49 INPUT/OUTPUT PIN Descriptions PIN descriptions Port settings in Configurator Characters supported by Configurator for Remote I/O control Supported CharactersCommand Syntax Remote I/O Control SMS Commands CommandsList of commands Status Messages Detailed Command Information and Responses Changing the PasswordList of response messages Changepword Failed Commands for the password controlReading Inputs Changepword OKINPUT1 Y InputGet X commandsInputget ALL OK Inputget X OKSubscribing to Input Alarms InputGetChange commands for alarm functionality Inputchangecancel Reading OutputsInputgetchange Z Outputget X OK OutputGet X commandsWriting Outputs Output X YOutputSet X commands OutputInvert X commands Inverting OutputsOutputinvert X OK Output X Y Output Pulses Output 7 Output 8 Output 9Output X Locked OutputPulse X commandsOutputpulse X on Outputpulse X OFFCancelling Output Pulses Output Pulse OFF time Error Network Time MissingOutputPulseCancel X commands OutputpulsecancelOutput X Pulse Cancelled Term123 Outputpulse 1 on 5s GPS support configured to serial port Location informationBbbbbbbbb Location Latitude LocationgetLocation LongitudeSafety Information Network SupportAntenna Medical DevicesVehicles Care and Maintenance Potentially Explosive Environments49/49