Panasonic PT-D3500E manual OPTION1 settings

OPTION1 settings

	OPTION1
COLOR CORRECTION
CONTRAST MODE
AUTO SIGNAL		OFF
BACK COLOR		BLACK
SUB MEMORY LIST
DVI EDID		EDID2:PC
SELECT	ENTER		RETRN

COLOR CORRECTION

OFF : Standard setting

USER : The six colours of red, green, blue, cyan, magenta and yellow can be adjusted and registered for each of four signal systems: Video, S-Video, RGB and

YPBPR.

Press the “ENTER” button to make the detailed settings.

	COLOR CORRECTION		The current signal
R		RGB
	0		system is displayed.
G	0
B	0
Cy	0
Mg	0
Ye	0
SELECT	ADJ	RETRN

CONTRAST MODE

There are two modes for adjusting to the operating environment.

NORMAL : The contrast is set to normal and the brightness to maximum.

HIGH : The contrast is set to maximum and the brightness to normal.

AUTO SIGNAL

The position where the screen is displayed can be adjusted automatically without pressing the AUTO SETUP button on the remote control each time signals are input when signals are input frequently such as when the projector is used at a conference.

ON : Auto setup is performed automatically when the video signals of the images being projected have changed.

OFF : The input auto setup function is set to OFF.

BACK COLOR

You can set the colours of the screen when no signal is input to the projector.

BLUE: Set screen colour to blue.

BLACK: Set screen colour to black.

SUB MEMORY LIST

Multiple sets of image adjustment data (PICTURE, POSITION, ADVANCED MENU adjustment values) for the same kind of signal can be registered.

SUB MEMORY LIST

ー： RGBーXGA60

1：

2：

3：

4：�

5：�

6：�

7：�

8：�

SELECT STORE

RETRN

Registering in sub memory

Select the sub memory number to be registered

using the button. Press the ENTER button.

Note • Sub memories range from 1 to 8.

How to select sub memory

Select sub memory number (1 to 8) using the buttons. Select “–” if you do not wish to

use the sub memory.

Press the ENTER button.

Note • You cannot select sub memory of a different signal system.

How to erase sub memory

Select sub memory number (1 to 8) corresponding

to sub memory to be erased using buttons. Press the STD button.

When the indicator of sub memory to be erased flashes, press the ENTER button.

DVI EDID

Set EDID to match the device connected.

Mode	Matching Signal
EDID1	480p, 576p, 720/60p, 1080/60i,
	1080/50i
EDID2:PC	VGA480/60, SVGA/60, XGA/60,
	XGA/70, XGA/85, SXGA/60

34