Panasonic PT-D3500E manual Connection, Setup precautions

Connection

Setup precautions

•Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again.

•All cable connections should be made with the entire system devices, including the projector, first turned off.

•Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables.

•Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

•The projector only accepts composite-video, S-video, analogue-RGB (with TTL sync. level), and digital signal from PC.

•Some PC models are not compatible with the PT-D3500E projector.

•The pin assignments on the S-VIDEO IN port are as follows:

Pin No. Signal

Ground (luminance)

Ground (colour)

Luminance signal

Colour signal

Viewed from mating side

•The pin assignments on the RGB2 input port are as follows:

•The pin assignments on the DVI-D input port are as follows (interface with DVI-D output port on PC):

Viewed from mating side

Pin No.	Signal	Pin No.	Signal
	T. M. D. S data 2-		T. M. D. S data 3+
	T. M. D. S data 2+		+5 V
	T. M. D. S data 2/4		Ground
	shield		Hot plug sense
	T. M. D. S data 4-		T. M. D. S data 0-
	T. M. D. S data 4+		T. M. D. S data 0+
	DDC clock		T. M. D. S data 0/5

Viewed from mating side

Pin No.	Signal
	R/PR
	G/G · SYNC/Y
	B/PB
	SDA
	HD/SYNC
	VD
	SCL

DDC data	shield
	T. M. D. S data 5-
T. M. D. S data 1-	T. M. D. S data 5+
T. M. D. S data 1+	T. M. D. S clock
T. M. D. S data 1/3	shield
shield	T. M. D. S clock+
T. M. D. S data 3-	T. M. D. S clock-

Pin : Not used.

Pins - , and : Ground.

Pins and : Valid if the PC has the corresponding function.

•The DVI-D input terminal supports single link only.

•EDID settings should be performed to suit the DVI equipment being connected. (Page 34)

•The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment.

18