Panasonic PT-D3500E Using the PJLink protocol, Supported commands, PJLink security authentication

Using the PJLink™ protocol

The network functions of the projector are compatible with PJLink™ Class 1. The operations mentioned below can be performed from a personal computer using the PJLink™ protocol.

•Projector settings

•Projector status inquiry

Supported commands

The commands for controlling the projector using the PJLink™ protocol are as given in the table below.

Command	Control Description			Remarks
		Parameter
POWR	Power control	0 = Standby
		1 = Power “ON”
		Parameter
		0 = Standby
POWR ?	Power status inquiry	1 = Power “ON”
		2 = Cooling down
		3 = During warm-up
		Parameter
INPT	Input selection	11	= RGB1
		12	= RGB2
		21	= VIDEO
INPT ?	Input selection inquiry	22	= S-VIDEO
		31	= DVI
		Parameter
AVMT	Shutter control	10	= Mute reset of video only
		11	= Mute video
		20	= Mute reset of audio only
		21	= Mute audio
AVMT ?	Shutter status inquiry	30	= Shutter mode OFF (Mute reset of video and audio)
		31	= Shutter mode ON (Mute video and audio)
		Parameter
		1st byte: Refers to fan error; one of 0 to 2
		2nd byte: Refers to lamp error; one of 0 to 2
		3rd byte: Refers to temperature error; one of 0 to 2
ERST ?	Error status inquiry	4th byte:		0 fixed
		5th byte:		0 fixed
		6th byte: Refers to some other error; one of 0 to 2
		The meaning of 0 to 2 is as given below.
		0 = Error not detected 1 = Warning 2 = Error
		Parameter
LAMP ?	Lamp status inquiry	First number (digits 1 to 5): Lamp cumulative time
		Second number: 0 = Lamp OFF; 1 = Lamp ON
INST ?	Input selection list inquiry	Parameter responds with following values:
		“11 12 21 22 31”
NAME ?	Projector name inquiry	Responds with the name set in “HOST NAME” of “NETWORK”
INF1 ?	Manufacturer's name inquiry	Responds with “Panasonic”
INF2 ?	Model name inquiry	Responds with “D3500”
INFO ?	Other information inquiry	Responds with version number and so on
CLSS ?	Class information inquiry	Responds with “1”

PJLink™ security authentication

The password used in PJLink™ is the same as the password set in the Web Browser Control. To use PJLink™ without authentication, do not set any password in Web Browser Control.

PJLink™ is the applied-for trademark in Japan, USA, and in other countries and regions. For specifications of PJLink™, see the website of the Japan Business Machine and Information System Industries Association. URL http://pjlink.jbmia.or.jp/

56