QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Display Controls
OSD Menu
Function Menus
OSD Lockout
DDC Change
APPENDIXES
Technical Information
Troubleshooting
Connect the AC Power
You must use the Ault power adapter with this display unit.
1Plug the AC power cord into the power adapter.
2Plug the power connector into the locking mini DIN port on the back panel. Push the connector in until the locking mechanism clicks.
3Plug the power cord into a grounded wall outlet.
Installation tips
If you need to place your display face down to attach cables, lower it carefully on a protective cloth to protect the screen.
Avoiding power surges
Use a surge protector between the power adapter and the outlet to prevent sudden current variations from reaching the display.
“Unlocking” the power cord
To detach the cord, press down on the plug housing and then pull out.
IN OPERATION: No power
Check that the display and computer are both turned on.
Verify that the outlet is functioning. Plug a lamp into the same outlet to check.
Check the status of the LED indicator on the power supply. If the green light is off, call customer support for assistance.
Check the status of the LED indicator on the display. If the display is on but the green light is neither steady nor blinking, call customer support for assistance.
VS15 Display | 5 |