QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Display Controls
OSD Menu
Function Menus
OSD Lockout
DDC Change
APPENDIXES
Technical Information
Troubleshooting
DDC Change
Follow these instructions to change the display from analog to digital mode or from digital to analog mode.
1Make sure the display power is ON. (The LED indicator is steady or blinking).
2Disconnect video cable from the display. The display indicates “No Video.”
3Wait for the “No Video” message to disappear.
4Push the Function UP ( 
) and Adjust MINUS ( 
) buttons simultaneously. This creates a change in the DDC file; one of the following messages appears.
The message on the left indicates a change from analog to digital mode. The message on the right indicates a change from digital to analog mode.
5Plug the video cable into the display. The display shows the supplied video input.
VS15 Display | 19 |