Planar VS15XAD-TR warranty Regulatory Compliance, More

QUICK LINKS

Contents

Index

Ordering Parts

Product Information

Regulatory Compliance

Warranty

GETTING STARTED

About the Display

Unpack Display

Identify Components

INSTALLING THE DISPLAY

Connect Power

Connect Video

Connect Audio

Connect Touch Screen

Power Management System

USING THE CONTROLS

Display Controls

OSD Menu

Function Menus

OSD Lockout

DDC Change

APPENDIXES

Technical Information

Troubleshooting

Regulatory Compliance

This display has been tested and certified to international medical safety standards IEC/EN 60601-1 and IEC/EN 60601-1-2, and is certified to meet C22.2 No. 601.1-M90 (C US Mark).

Because many medical offices are located in residential areas, the medical display, in addition to meeting medical requirements, has also been tested and found to comply with the limits for Federal Communications Commission (FCC) Class B computing devices in a typically configured system. It is the system integrator or configurer’s responsibility to test and ensure that the entire system complies with applicable electromagnetic compatibility (EMC) laws.

Planar Systems, Inc. has made great efforts to support the medical device industry, in particular, medical device manufacturers and medical device system integrators. We offer state-of-the-art color displays that are compliant with worldwide accepted medical device safety standards, and for the European market, CE-marked displays based on compliance with counsel directive 93/42/EEC commonly referred to as the Medical Device Directive (MDD). The following summarizes our qualification of these displays as it relates to compliance with the MDD.

The European Medical Device Directive requires that the intended use of the device be defined. The intended use of these displays is “to display alphanumeric, graphic, and image data as inputted from any type of medical device.” These displays do not provide a measurement function in any way, and it is the device and systems manufacturer’s responsibility to verify its function in the integrated device or system.

The display was classified as required by the MDD according to Annex IX of the directive and the medical device (MEDDEV) guidance available at the time of classification. Because the display uses electrical energy and has no direct patient connections and—by itself—no medical utility, the display is classified according to Rule 12 as an MDD Class I device-component or accessory. The MDD states that manufacturers of Class I medical devices or accessories shall satisfy the requirements in regard to design and manufacturing controls, that is, the applicable assessment route to be used for CE-marking under the MDD, and it shall carry the CE mark according to Annex XII of the directive, with no notified body annotation.

MORE

VS15 Display iv