5. The rear of this LCD display has 4 integrated 4 mm, 0.7 pitches threaded nuts.
AB
C D
Use the four holes (A), (B), (C), and (D) to attach the swing arm or other mounting fixture to the back of the monitor with screws (not supplied).
Note: The
Please use M 4mm x 10mm (L) Screw for this application.
6.Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
The four threaded holes that are on the back of the panel are compliant with the VESA standard for mounting
7.Attach a swing arm or other mounting fixture.
7