DLP® Projector – User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
•The projector table or stand should be level and sturdy.
•Position the projector so that it is perpendicular to the screen.
•Be sure cables are not in the way or can cause the projector to be knocked over.
1.
2.
3.
To raise the level of the projector, lift the projector [A] and press the height- adjuster button [B].
The height adjuster drops down [C].
To lower the level of the projector , press the
To adjust the angle of the picture, turn the tilt adjuster [D] right or left until desired angle has been achieved.
– 17 –