DLP® Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
2.
3.
4.
Press the Menu button to open the Main menu.
Press the cursor 
button to move to the Status menu.
Press the cursor 
button to
move down to Lamp Hour Reset.
Press the cursor 
or Enter button.
A message screen appears.
5. Press the cursor buttons in this order: 
; 
; 
; 
.
The Status menu appears again showing the Lamp Hours reset to zero.
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure
Warning:
1.Be sure to turn off and unplug the projector at least an hour before cleaning. Failure to do so could result in a severe burn.
2.Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector.
3.If a little water gets into the projector interior while cleaning, leave unplugged in a
4.If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the pro- jector lens.
– 37 –