Planar PR5022 manual Advance Feature

DLP® Projector – User’s Manual

	Function	RGB	DVI	Component Video		Composite Video		S-video
	Reset	x	x	x		x		x
x = available to video source
Advance Feature
Press the Menu button to open the OSD menu. Press					to move to the Setup menu. Press				to
move to the Advance Feature menu and then press Enter or						. Press	to move up and down in
the Advance Feature menu. Press				to change values for settings, and then press Enter or					to
confirm the new setting.

Item		Description	Default
User Color	This feature adjusts the color balance in each color of RGB (red,		80
	green, blue), and their neutral colors (cyan, magenta, yellow,
	white) by using color correction adjustment. Increasing a color’s
	setting heightens the intensity of that color on the screen, while a
	lower setting makes the color less intense.
	Press	to select a color.
	Press	to adjust the selected color. (Range: 0 – 100)
White	White Peaking increases the output in the brightest whites without		Data source:
Peaking	changing the blacks and dark grays. It crushes the whites slightly,		10
	but it does not appear to clip them or seriously obscure white de-		Video
	tail. If you prefer a stronger image, adjust toward the maximum
	setting. For a smoother, more natural image, adjust toward the		source: 2
	minimum setting.
	Press	to adjust the value of white peaking. (Range: 0 – 10)
Logo	Press	to enable or disable if the logo displays when the pro-	On
Display	jector starts, and when no source is detected. (Range: On – Off)

– 26 –