Installation
Connecting the Projector
Install the Projection Lens
Before install or replacing the lens, switch off the power to the projector
Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/ focus while the lens attachment process is carried out.
1
2
5
4 
3
6
Install Lens Procedure: 
1.Unscrew the 2 screws and lift up the lens door. 1
2.Remove the projector cap. 2
3.Push the release lever up to release the lock. 3
4.Remove the lens cap. 4
5.Push the lens into position. 5
6.Push the release lever down to lock the lens in place. 6 To replace the lens, reverse the previous steps.
11English