Optoma Technology TH7500NL manual Option Remote Settings, IR Function, Remote Code

User Controls

OPTION Remote Settings

LED indicator
IR 3 IR 4	IR 1 IR 2

Function 1

Choose your desired function from “Brightness” , “PIP”, “Test Pat- tern”, “Zoom”, “Projection”, “V ARC+” or “H ARC+”.

Function 2

Choose your desired function from “Contrast” , “PIP Source”, “PIP Swap”, “Color”, “V ARC-”, “H ARC-” or “Lamp Settings”.

IR Function

When this function is “On”, the projector can be operated by the remote control. By selecting “Off”, you will only be able to use the control panel keys.

Remote Code

Set IR address of the remote. The address of the remote control is changed by pressing the Video and arrow buttons together to select IR address 1/2/3/4. The remote control LED indicator will blink twice to confirm the new remote control address.

IR 1: Press Video and RIGHT buttons together for IR 1. After finish the remote code, the remote control LED indicator will flash Green 1 time to confirm.

IR 2: Press Video and DOWN buttons together for IR 2. After finish the remote code, the remote control LED indicator will flash Green 2 times to confirm.

IR 3: Press Video and LEFT buttons together for IR 3. After fin- ish the remote code, the remote control LED indicator will flash Green 3 times to confirm.

IR 4: Press Video and UP buttons together for IR 4. After finish

47English