Optoma Technology TH7500NL manual Powering off the projector

Installation

Powering off the projector

1.Press the “ ” button on the remote control or press the “ ” button on the control panel to turn off the projector. 4 The following message will be displayed on the screen.

Press the “ ” button on the remote control or press the “ ” button on the control panel again 4 to confirm otherwise the message will disappear after 15 seconds. When you pressing for the second time, the projector will shut down.

2.The cooling fans continue to operate for about 60 seconds for cooling cycle and the POWER LED will flash Blue. When the POWER LED turns red, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press the “ ” button on the remote control or press the “” button on the control panel to restart the projector. 4

3.Power off the switch. 2

4.Disconnect the power cord from the electrical outlet and the projector.

5.Do not turn on the projector immediately following a power off procedure.

4

Or

INFO.

AV MUTE

SOURCE

MENU

LENS

RE-SYNCSHIFT

ENTERFOCUS

ZOOM

15English