HD3000 User’s Guide
Professional Video Scaler and Color Management System
Option 2
Using HD3000 as video source selector:
This option is intended for user who wants to hook up their audio by optical or analog means instead of through HDMI.
1)Connect the video sources to the HD3000.
2)Connect the audio out of the video sources directly to your receiver.
3)Attach the short HDMI cable that comes standard with the unit to the “To AV Receiver” port on the back of the HD 3000. Connect the other end to the “From AV Receiver” port on the back of the HD3000. This will allow the video signal to be properly managed.
4)Finally, connect a HDMI cable to the “To Display” on the back of the HD3000 to your display.
Option 3
If you have a single HDMI source, you can hook the Video source directly up to the “From AV Receiver” port on the back of the HD3000. Connect a second HDMI cable to the “To Display” port on the back of the HD3000 and attach the other end to your Plasma TV or Projector display system.
This configuration will provide the channels of audio and high resolution video for your display.
HD3000 User’s Guide
10