HD3000 User’s Guide
Professional Video Scaler and Color Management System
Color Vividness
The HD3000 includes 3 preset color management settings and one user definable setting. You can easily switch between the modes to achieve different effects.
1.Use “h”, “i” arrow keys to select the “Color Vividness” adjustment item, press “Enter” key or “g” key to enter this adjustment item. The Menu disappears and a small adjustment bar is shown (as shown below).
IMAGEI ADVANCED
| Noise Reduction | 0 | |
IMAGE | Gamma |
| 1 |
| Color Temp |
| Warm |
| Image Mode |
| Film |
DISPLAY | Edge Enhancement | Off | |
| |||
| Color Vividness | Off | |
SYSTEM | B/W Extension | Off | |
|
|
| |
| Demo |
| Off |
| Reset |
|
|
SETUP |
|
|
|
| Select | Enter Enter | Back Menu |
2.Use “f”, “g” arrow keys to select default modes.
3.For User mode adjustment, put cursor on “User”, press “Enter” key to enter this adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown below).
Color Vividness | Off 1 2 3 User |
4.Use “h”, “i” arrow keys to select the desired adjustment item, press “f”, “g” arrow keys to adjust image.
5.User can select and setup their favorite settings on “User” and adjust submenu shows
as the following. (Please refer to the following description and graphic about Saturation and Hue adjustment details.)
1)Choose a color (Green, Blue, Cyan, Yellow, Magenta and Red) and move to “Saturation” or “Hue” to
2)Enter “Saturation” to adjust “level” (brightness level) on Lengthwise gradation from level 0 to 15, and then adjust the value of Saturation from
HD3000 User’s Guide
47