HD3000 User’s Guide
Professional Video Scaler and Color Management System
Edge Enhancement
There are 5
1.Use “h”, “i” arrow keys to select the “Edge Enhancement” adjustment item, and then press “Enter” key or “g” key to enter this adjustment item. The Menu disappears and a small adjustment bar is shown (as shown below).
IMAGEI ADVANCED
| Noise Reduction | 0 | |
IMAGE | Gamma |
| 1 |
| Color Temp |
| Warm |
| Image Mode |
| Film |
DISPLAY | Edge Enhancement | Off | |
| |||
| Color Vividness | Off | |
SYSTEM | B/W Extension | Off | |
|
|
| |
| Demo |
| Off |
| Reset |
|
|
SETUP |
|
|
|
| Select | Enter Enter | Back Menu |
2.Use “f”, “g” arrow keys to select default modes.
3.For User mode adjustment, put cursor on “User”, and then press “Enter” key to enter this adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown below).
Edge Enhancement | Off 1 2 3 4 5 User |
4.Use “h”, “i” arrow keys to select and choose “Edge enhancement” bar, and then press “f”, “g” arrow keys to adjust different enhancements.
5.User can select and setup different settings for each mode (1 to 5) in “User” option and adjust submenu shows as the following: When user chooses one mode and presses “Enter” to see the original settings of each item; user may then adjust the value per the original setting of each mode.
HD3000 User’s Guide
45