Optoma Technology HD3000 manual Recommendations

Page 5

HD3000 User’s Guide

Professional Video Scaler and Color Management System

Recommendations

To unleash the power of the HD3000, it is best to input video content in its original form without any processing. This will utilize the full capabilities of the HD3000 for de-interlacing, scaling and image enhancement. As an example, if a user has an HDMI DVD player capable of outputting the video signal in a 480i/576i digital format, we recommend feeding it directly to the HD3000 without any processing by the DVD player. This will provide the HD3000 with the original digital video stream and allow the HD3000 to fully unleash its studio grade video processing.

In general, we recommend the following:

•If possible, use digital output (DVD, D-VHS, DTV setup box, etc). If there is no digital output, use the component output terminals (YPbPr) with short and high-quality components cables.

•If you are unsure of the quality of the internal de-interlacing or scaler of your video source, let the HD3000 do the processing by connecting it to the interlaced component output.

•If possible, leave out any extra video processing in your video source (DVD, D-VHS, and HDTV STB).

•Some HDTV STB models have scaling conversion that will output 1080i from a 720p format. Try to output 1080i in its native signal format and let HD3000 perform de- interlacing and scaling.

•Not all HDMI DVD players have a digital interlaced output (480i/576i). For these products, it is suggested that users try 480p/576p first, followed by 720p and 1080i. After viewing the full range of output resolutions, the user can then judge which is the best image quality and set the HD3000 for that resolution.

•Many high-end analog output DVD players also come with high quality DAC with 12 or 14 bits of processing. Again, the users should try setting their 480i/576i output to the HD3000 first.

•The HD3000 has BNC connectors for component video input. If the user plans to use analog component to connect to their video source, for the best image quality, it is recommend using the BNC connectors.

•For connecting to a Laser Disc player or S-VHS deck, we suggest using S-Video output to connect to the HD3000.

•It is best to have a separate power outlet for audio and video equipment.

HD3000 User’s Guide

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HD3000 User’s Guide HD3000 User’s Guide Table Of Contents Introduction Recommendations HD3000 Video Scaler AccessoriesSupplied Components Input Configurations InstallationSystem Requirements Front PanelBack Panel Connecting HD3000 to AV RecieverOption HD3000 User’s Guide Establishing Initial Output Resolution To Change the Output Resolution VHS System ConnectionsStep Wall MountingRemote Control and Buttons Remote ControlFront Control Panel Setup OSD Structure Operations And ControlsImage Display System Setup Display Setup Table B Initial SetupTable a First line shows the current signal. Use g IRE Other choices Auto Calibration Initial AdjustmentsVideo and Composite Video White LevelComponent YPbPr Analog RGB Image Image AdjustmentISF Modes User Modes Aspect Ratio Adjustment Display SettingsYou have created a new format, do you want to save it ? Image Shift Adjustment Zoom 125 Zoom AdjustmentEdge Masking Mask Background Color Image Advanced AdjustmentsNoise Reduction Noise ReductionGamma Gamma0Mode Description Image ModeColor Temp Color TemperatureRed Contrast Imagei Advanced Edge EnhancementPress Enter to load Ref. Mode Imagei Advanced Color VividnessLevel Extension Demo Mode Programmable 12V Trigger System AdjustmentsOutput Resolution Selection Firmware Upgrades Product Highlights And Features Specifications500~5,000 ft 5C~30C Input Connectors Connector DetailingOutput Connector Other connectorsVideo Compatibility Computer Compatibility Analog Resolution Sync Hz Sync KHzCompatibility RS 232 Instructions RS 232 specificationConnecting RS 232 with HD3000 Step Important Safety Instructions For Your Display Important Safety InstructionsHD3000 User’s Guide Appendices USA
Top Page Image Contents