Video Image showing colour misalignment on vertical details
-Verify compatibility of video/graphic signals with technical specifications of your projector.
-Adjust Y/C Delay settings in the Image Adjustments / Advanced Settings to reduce colour misalignment. For best results use an external colour bar test pattern source.
Remote control does not work
-Check the batteries and for correct polarity.
-Ensure that the area between the infrared sensor (front of projector) and the remote control is free of obstruction.
-Ensure that infrared sensors (front and rear of projector) are not exposed to intense light levels.
12 OPTIONAL ACCESSORIES
You can purchase the following optional accessories at your Dealer:
- Wall/Ceiling Bracket Kit.
CAUTION: for ceiling/wall installation, by means of suspension bracket, carefully follow the instructions and safety instructions recommended by the Manufacturer in the bracket’s literature.
Use only original, or Faroudja approved, accessories.
26