Marantz RX9001 manual Connecting the Extender to the Network, Using the Extender

Page 12

RX9001 User Guide

Inserting a Multimedia Server in the Network

You can add an Escient Media Server or an Imerge Sound Server to your network.

1Connect the Server to the router.

2Open Wizz.it Ex.

3Open the configuration file.

4To insert a Multimedia Server in the configuration file, click the ‘Insert Escient Media Server’ button or the ‘Insert Imerge Sound Server’ button.

5Open the Multimedia Server Properties.

6Adjust the settings of the Multimedia Server:

•If the Multimedia Server has a fixed IP-address, fill in that IP-address.

•If it has a dynamic IP-address, fill in its host name.

Connecting the Extender to the Network

The Extender is normally ready for use and does not need to be configured. The settings need only be adjusted in case you wish to operate the Extender with a fixed IP-address, or if there is more

than one Extender in the Wireless Network.

Note Before you start using or configuring the Extender, check if any firmware updates are available in the Downloads section on http://www.marantz.com in the Home Entertainment section of your region.

Refer to the chapter ‘Firmware Update’ on page 13 for further details.

Using the Extender

1Connect the Extender to the router with a straight Ethernet cable.

Extender

Straight

Ethernet cable

Router

2Set the Extender ID switch to 1 or to an ID that is not yet used by another Extender in

the Wireless Network.

3Set the Configuration switch to 1 for use:

Configuration switch: 1

9

Image 12

Contents Model RX9001 User Guide Serial Extender Avertissements RX9001 UserRX9001 UserGuideGuide Contents RX9001X9001 User GuideUser GuideBefore You Start Unpacking the Extender Serial ExtenderInstalling the Extender Mounting the Extender in a RackConnecting the Extender to External Equipment Adjusting the Power Level of the IR OutputsAttaching the Extender to Infrared Controlled A/V equipment Using the Sensor Inputs Wizz.it ExConnecting to Relay-controlled Equipment Connecting to Serial EquipmentConnecting to a Lutron RadioRa Lighting System Open Wizz.it Ex Open the configuration fileOpen the Lutron Lighting System Properties Connecting the Extender to the Network Using the ExtenderSet the Configuration switch to 1 for use Inserting a Multimedia Server in the NetworkConfiguring the Extender Configuration with a direct connection to the PCSet the Configuration switch to 2 for configuration Configuration through a router Set the Configuration switch to 3 for configurationTools menu, select Extender Discovery Troubleshooting SupportWhat Do the LEDs Indicate? There is an IP conflictFirmware Update Resetting the ExtenderOperating A/V components with the Extender Updating the Extender through a Router Specifications Serial Extender User GuideRemarks RX9001 User Guide RX9001 User Guide FCC Compliancy Czech Likvidace starého výrobkuDanish Bortskaffelse af dit gamle produkt Dutch Verwijdering van uw oude productFinnish Vanhan tuotteen hävittäminen French Mise au rebut des produits en fin de vieGerman Entsorgung Ihres alten Geräts Hungarian Az elhasznált termék hulladékkezeléseIii Marantz America, Inc Corporate Drive Mahwah, NJ07430 Is a registered trademark