Marantz RX9001 manual Configuration through a router, Tools menu, select Extender Discovery

Page 14

RX9001 User Guide

Configuration through a router

1The Extender is already connected to the router. Connect the router to the PC as well.

Straight

Ethernet cable

Extender

Router

2Set the Configuration switch to 3 for configuration:

Configuration switch: 3

The Extender will restart. After start-up, the Power and Ethernet LEDs are green and the Busy LED is red/green blinking.

3Open Wizz.it Ex on the PC.

4In the Tools menu, select Extender Discovery.

The Extender Discovery tool appears, with a list of all the detected Extenders in the Wireless

Network.

5Select the Extender that you want to configure and click on the Configure button. The Configuration Tool opens in the browser.

6Make sure you have the IP address and netmask at hand, and follow the onscreen instructions.

7When the configuration is completed, disconnect the Extender from the computer and reconnect it to the router with a straight Ethernet cable. Set the Configuration switch to 1 for use.

Tip When the Extender is not recognized by the Extender Discovery tool, configure the Extender directly with the configuration cable, as described on page 10.

11

Image 14
Contents Model RX9001 User Guide Serial Extender Avertissements RX9001 UserRX9001 UserGuideGuide Contents RX9001X9001 User GuideUser GuideBefore You Start Unpacking the Extender Serial ExtenderInstalling the Extender Mounting the Extender in a RackAttaching the Extender to Infrared Controlled A/V equipment Connecting the Extender to External EquipmentAdjusting the Power Level of the IR Outputs Using the Sensor Inputs Wizz.it ExConnecting to Relay-controlled Equipment Connecting to Serial EquipmentOpen the Lutron Lighting System Properties Connecting to a Lutron RadioRa Lighting SystemOpen Wizz.it Ex Open the configuration file Set the Configuration switch to 1 for use Connecting the Extender to the NetworkUsing the Extender Inserting a Multimedia Server in the NetworkSet the Configuration switch to 2 for configuration Configuring the ExtenderConfiguration with a direct connection to the PC Tools menu, select Extender Discovery Configuration through a routerSet the Configuration switch to 3 for configuration What Do the LEDs Indicate? TroubleshootingSupport There is an IP conflictOperating A/V components with the Extender Firmware UpdateResetting the Extender Updating the Extender through a Router Remarks SpecificationsSerial Extender User Guide RX9001 User Guide RX9001 User Guide Danish Bortskaffelse af dit gamle produkt FCC CompliancyCzech Likvidace starého výrobku Dutch Verwijdering van uw oude productGerman Entsorgung Ihres alten Geräts Finnish Vanhan tuotteen hävittäminenFrench Mise au rebut des produits en fin de vie Hungarian Az elhasznált termék hulladékkezeléseIii Marantz America, Inc Corporate Drive Mahwah, NJ07430 Is a registered trademark