Adjusting the image
Position the projector to the desired distance from the screen at a 90 degree angle to the screen. See page 8 for a table listing of screen sizes and distances.
Remove the projector top cover
a. Slide the tabs on the side toward the rear of the projector to unlock the projector top cover.
b. Slide the top toward the front of the projector to unhook it from the projector body.
c. Lift off.
Adjust the zoom or focus.
If the image is square but not centered on the screen or viewing area, adjust it by using the lens shift dials. See page 7 for details.
Rotate the elevator feet for granular adjustment of the projector’s height. Avoid placing your hands near the hot exhaust vent at the side of the projector.
Adjust distance
Remove cover
Adjust zoom, focus and lens shift
(b) (a)
(a)
(c)
focus
zoom
horizontal | vertical |
Adjust the Contrast or Brightness in the Basic Picture menu. See page 27 for help with these menu adjustments.
Adjust height
Release button
Elevator foot
12