InFocus SP8602, SP8600 manual Using the security lock

Page 35

4Loosen the captive screws that attach the lamp housing to the projector.

5Using the handle, carefully remove the lamp housing. Dispose of the lamp in an environmentally proper manner in accordance with local disposal laws.

6Install the new lamp housing, pressing the lamp into place.

7Tighten the captive screws.

8Replace the lamp door and tighten both screws.

9Plug in the power cord and press the Power button to turn the projector back on.

10To reset the lamp hour timer, navigate to the Status and Service menu and select Reset Lamp Hours. See page 31 for details.

Using the security lock

The projector has a security lock for use with a Cable Lock System. Refer to the information that came with the lock for instructions on how to use it.

Security lock

Image 35

Contents Page Canada Declaration of ConformityTrademarks FCC WarningTable of Contents Important Operating Considerations for Safety When the power cord or plug is damaged or frayed Online registration Optional AccessoriesProduct specifications Introduction12V External Trigger outputs Connector panelHorizontal Offset +/-15% Positioning the projectorRange of distance to the screen for a given screen size Ceiling MountCable management VGA connection Connecting powerConnecting a computer source HDMI 1.3 connectionNo start up screen? Get help on page Displaying an imageAdjusting the image S-video connection Connecting a video deviceVideo device connections Composite video connectionWhat is Aspect Ratio? Screen Save Time Troubleshooting your setupTable 1 Status indicator light behavior and meaning Shutting down the projectorpower button Problem No start up screen Only start up screen appearsSolution Plug power cord into the projector, then pressOnly my laptop’s background appears, not the ProblemNo computer image, just the words “Signal out of range”Move projector, adjust zoom and lens shift Set your computer’s display resolution to the nativeresolution of the projector Start Settings Control Panel Display Settings tabSquare image Adjust Keystone in the Basic Picture menuAdjust Sharpness in the Basic Picture menu Image not squareImage upside down Turn off Ceiling Mount in Setup menuTurn off Rear Project in Setup menu Adjust color, tint, brightness, contrast in the Basicpresentation does not play on the screen The video embedded in my PowerPointTurn off the internal LCD display on your laptop Embedded video plays correctlyReplace lamp Lamp door “Replace lamp” message appears at startup, lampLamp must be replaced see page won’t turn on, Lamp light is turned onTroubleshooting the remote Using the remote controlOptimizing computer images Using the keypad buttonsPresentation features Customizing the projector Optimizing video imagesUsing the menus Basic Picture menu Advanced Picture menu Setup menu Menu Transparency Allows you to change how much of the projected image Help Status and Service menuWARNINGS MaintenanceCleaning the lens unplug projector Replacing the projection lampTurn off and Using the security lock HDMI AppendixSplitScreen Compatibility Command Format RS-232 CommandsCommunication Configuration RS-232 Port SettingsLimitations Write Command ExamplesError Conditions Blank Screen Style 1 TimerResolution Signal1 Lamp won’t strike Lamp Total On Time 1 Display Projector Info menuCommand Reset Lamp Hours1 Reset Save User PresetsSystem State Numerics INDEX