Onkyo HT-S5200 Level Cal Speaker Levels Calibration, Equalizer Equalizer Settings, Frequency

Page 72

Advanced Setup—Continued

Unit

feet:

Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

 

meters:

Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

Front, Center, SurrRight, SurrBack Right, SurrBack Left, SurrLeft, Subwoofer

Specify the distance from the each speaker to your listening position.

5. Level Cal (Speaker Levels Calibration)

These settings are set automatically by the Audyssey 2EQ™ Room Correction and Speaker Setup function (see page 39).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. A pink noise test tone is output by the front left speaker.

Notes:

Speakers that you set to “No” or “None” in the “3. Sp Config” (page 70) do not output the test tone.

These settings cannot be changed while a pair of headphones is connected, or speaker set A is off, or speaker set B is on, or the AV receiver is muted.

Left, Center, Right, SurrRight, SurrBack Right, SurrBack Left, SurrLeft, Subwoofer

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

6. Equalizer (Equalizer Settings)

These settings are set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function (see page 39). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 72.

Notes:

You can select: “63Hz”, “250Hz”, “1000Hz”, “4000Hz”, or “16000Hz”. And for the subwoofer, “25Hz”, “40Hz”, “63Hz”, “100Hz”, or “160Hz”.

While the Direct listening mode is selected, the equalizer settings have no effect.

The equalizer setting cannot be changed while a pair of headphones is connected, or speaker set B is on.

EQ

Manual: You can adjust the equalizer for each speaker manually. If you select “Manual”,

 

 

continue with this procedure.

 

 

Select a frequency

 

 

 

 

 

 

 

1

Use the Down [w] button to select “Ch”, and then use the Left and

 

 

 

Right [e]/[r] buttons to select a speaker.

 

 

2

Use the Up and Down [q]/[w] buttons to select a frequency. Use

 

 

 

the Left and Right [e]/[r] buttons to adjust the level at that

 

 

 

frequency.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

 

 

 

Tip:

 

 

 

Low frequencies (e.g., 63Hz) affect bass sounds; high frequencies (e.g.,

 

 

 

16000Hz) affect treble sounds.

 

 

 

 

 

 

 

3

Use the Up [q] button to select “Ch”, and then use the Left and

 

 

 

Right [e]/[r] buttons to select another speaker.

Repeat steps 1 and 2 for each speaker.

Speakers that you set to “No” or “None” in the “3. Sp Config” (page 70) do not output the test tone.

Audyssey: The tone for each speaker is set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function. Be sure to select this setting after having performed the Room Correction and Speaker Setup. “Dynamic EQ” and “Dyn Vol” become available (see page 74).

Off: Tone off, response flat (default).

72

Image 72
Contents HT-S5200 Important Safety Instructions AvisPrecautions PowerPreventing Hearing Loss Caution Batteries and Heat Exposure WarningSpeaker Precautions Package ContentsPackage Contents Using Two Sets of Speakers Speaker Sets a and BFeatures AmplifierProcessing ConnectionsFeatures Contents Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel CBL/SAT VCR/DVR IN/OUTDVD/BD Subwoofer PRE OUTSpeaker Package Subwoofer SKW-570Speaker Package Keyhole slotsSpeaker terminals Remote Controller Controlling the AV receiverRemote Controller Installing the BatteriesAiming the Remote Controller Connecting the AV receiver Enjoying Home TheaterConnecting the AV receiver Speaker ConfigurationSpeaker Connection Precautions Connecting Speaker Set a Connecting Speaker Set BUsing the Rubber Stoppers for a More Stable Platform Using the Floor Pads for SubwooferWall Mounting Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter About AV Connections Optical Digital Jacks AV Connection Color CodingAV Cables and Jacks Connecting Audio and Video Signals to the AV receiver Which Connections Should I Use?Video Connection Formats Audio Connection FormatsConnecting Components with Hdmi About HdmiAbout Copyright Protection Pass-ThruMaking Hdmi Connections TipConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD/BD player Connecting a VCR or DVR for Playback Connecting a VCR or DVR for Recording Make the audio connection aSatellite, cable, set-top box, etc Connecting a Camcorder, Game Console, or Other Device Connecting a Portable Audio playerMake the video connection a Make the audio connection a Connecting a CD Player or Turntable CD Player or Turntable MM with Built-in Phono Preamp StepConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting an RI Dock Connecting the Supplied UP-A1L DockNot all iPod models output video If Your iPod Supports VideoConnecting Onkyo u Components Connecting the Power CordAuto Power On/Standby Direct ChangeTurning On the AV receiver Turning On and StandbyUp and Running in a Few Easy Steps Did you connect an Onkyo MD recorder or CD recorder?First Time Setup Audyssey 2EQ Room Correction and Speaker SetupMeasurement Positions First Time Setup Using Audyssey 2EQError Messages To Retry the Room Correction and Speaker SetupChanging the Speaker Settings Manually Using a Powered SubwooferComponent Video Input Setup Digital Input SetupFollowed by the Setup button Press the Setup buttonChanging the Input Display Select a listening mode and enjoy Basic OperationsBasic AV receiver Operation Start playback on the source componentSetting the Display Brightness Using the Sleep TimerBasic Operations Muting the AV receiver7Using Headphones Displaying Source Information Adjusting the Bass & TrebleUsing the Music Optimizer Specifying the Digital Signal FormatAM/FM Frequency Step Setup Listening to the RadioButtons to select 8.Hardware Tuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio Information Presetting AM/FM Stations Deleting PresetsSelecting Presets Setting Up the SiriusConnect Home Tuner Listening to Sirius Satellite RadioListening to Sattellite Radio Positioning the AntennaSetting the Satellite Radio Mode Listening to Sirius Satellite RadioSelecting Sirius Satellite Radio Signing Up for Sirius Satellite RadioChannel Search Mode Selecting Sirius Satellite Radio ChannelsCategory Search Mode Direct TuningPresetting Sirius Channels Deleting Presets Displaying Sirius Satellite Radio InformationPositioning the SiriusConnect Home Tuner See the previous sectionParental Lock Changing the PIN Number UP-A1L Dock for iPod About the UP-A1L DockCompatible iPod models Putting Your iPod in the DockUP-A1L Dock for iPod Controlling iPodStatus messages Recording Recording from Different AV SourcesRecording the Input Source Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV receiverUsing the Listening Modes Listening Modes Available for Each Source FormatMono/Multiplex Sources Stereo Source Channel Sources DTS-ES Discrete/Matrix SourcesAbout the Listening Modes Onkyo Original DSP Modes Advanced Setup Common Procedures in Setup MenuSpeaker Settings Advanced Setup Crossover Crossover FrequencyDouble Bass Sp Distance Speaker DistanceEqualizer Equalizer Settings Left and Right e/ r buttons to adjust the level at thatLevel Cal Speaker Levels Calibration Use the Down w button to select Ch, and then use the LeftAudio Adjust Settings Audio Adjust Multiplex/Mono SettingsPLIIx/Neo6 Music Mode Settings PLIIx Music 2ch Input Dolby EX Input Signal Setting Audyssey SettingsTheater-Dimensional Setting Hardware Setup Using the Audio Settings Audyssey Dynamic Volume Music OptimizerSpeaker Levels SyncPreprogrammed Remote Control Codes Entering Remote Control CodesControlling Other Components Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting the Remote Mode Buttons Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a CD Player, CD Recorder, or MD Player Controlling a Cassette Recorder Previous and Next 7/6 buttonsRewind and Fast Forward 5/4 buttons Reverse Play t buttonWhen Using an RI Dock Controlling an RI DockTroubleshooting Troubleshooting AV receiver’s remote controller doesn’t control your iPod Sound changes when I connect my headphonesCan’t control other components There’s no soundVideo ATT0 default Video AttenuationSpecifications Amplifier SectionVideo Section Tuner SectionSpecifications Subwoofer SKW-570Front Speaker SKF-570 Center Speaker SKC-570Memo Memo 3 4 4 9 3

HT-S5200 specifications

The Onkyo HT-S5200 is a remarkable home theater system that offers an impressive blend of features, technology, and sound quality, making it an excellent choice for both audio enthusiasts and casual movie watchers alike. This 5.1 channel surround sound system is designed to provide an immersive audio experience, perfect for enhancing your favorite films, music, and video games.

At the heart of the HT-S5200 is the powerful 3D surround sound processing, which utilizes Dolby TrueHD and DTS-HD Master Audio formats. These technologies ensure that you experience high-definition audio that is crystal clear and richly detailed. Whether you're engrossed in an action-packed blockbuster or a heartfelt drama, the system delivers sound that transports you right into the action.

One standout feature of the HT-S5200 is its advanced 6.1-channel input, allowing for Dolby Digital and DTS surround sound processing. This enables the system to decode a wide range of audio formats, providing versatility for various media sources. The system is also equipped with multiple HDMI inputs, making it easy to connect all your favorite devices, from Blu-ray players to gaming consoles, ensuring a clutter-free setup.

The system comes with a well-designed 5.1 speaker configuration, which includes a subwoofer that delivers deep bass, enhancing your listening experience. The compact design of the satellite speakers makes them easy to integrate into any room, while still producing powerful sound that fills the space.

Another impressive aspect of the Onkyo HT-S5200 is its user-friendly interface, which includes an easy-to-navigate remote control and an intuitive on-screen display. This makes it simple to adjust settings and choose different audio modes, ensuring you get the most out of your home theater experience.

The HT-S5200 also features a variety of connectivity options, including Bluetooth, which allows for seamless streaming of music from your smartphone or tablet. This feature adds modern convenience to the system, enabling users to enjoy their favorite playlists without the hassle of cables.

In conclusion, the Onkyo HT-S5200 home theater system stands out as a powerful and versatile choice for anyone looking to elevate their home entertainment setup. With its advanced audio technologies, user-friendly design, and impressive sound performance, it promises to deliver a captivating surround sound experience that is sure to impress.