Ceiling Mount Installation Guide

The LP 750 LiteMountTM makes it easy to hang your projector from the ceiling for fixed installa- tion use in meeting, auditorium and training room settings. A unique quick-release feature allows you to take the projector down in seconds to replace the lamp or move the projector to another location.

You must determine the suitability of this prod- uct for your intended use and assume all risk and liability in connection therewith. In Focus recommends that a professional contractor or other facilities professional assist you in mount- ing this device. Be sure to take precautions to meet all local building codes.

Additional LiteMount Products

In Focus offers two additional LiteMount prod- ucts that may make your ceiling mount installa- tion easier.

•The LiteMount False Ceiling Plate

(SP-LTMT-PLT) is designed for suspended ceil- ings with acoustic tiles. It mounts in your ceil- ing in place of a ceiling tile. It is pre- assembled with threaded studs to install the LiteMount brackets, and includes the neces- sary hardware to attach to the brackets.

•The LiteMount Pipe Tubing Extension (SP- LTMT-EXT) allows you to install the projector in a room with a high ceiling. With the exten- sion, you can place the projector from 24”

(61 cm) to 46” (117 cm) from the ceiling (12” to 24” with cut).

Contact your In Focus dealer to order these products.

WARNING: This installa- tion must be performed in compliance with your local building code require- ments. Local require- ments take precedence over any instructions given in this guide.