4Loosen the three captive screws (marked by the arrows) on the lamp module.
5Carefully remove the lamp module by grasping and lifting the handle. Dispose of the lamp in an environmentally proper manner.
6Install the new lamp module, making sure that it is properly seated, and tighten the three captive screws.
7Replace the cover over the lamp module by sliding it back into place and tightening the screw.
8Plug in the power cable, press the power switch then press the Power button to turn the projector back on. Reset the lamp hour timer by navi- gating to the Settings>Service menu and selecting Reset Lamp Hours.
loosen the captive screws on lamp module
lamp module handle
reset lamp hours in Service menu
35