InFocus IN42ff manual Connect monitor cable Connect RS-232 cable

Page 9

If you are using a desktop computer and want to see the image on your computer screen as well as on the projection screen, plug the monitor cable to the Monitor out connector on the projector.

You can control the projector from an LCD control panel, touch screen, or other control device or computer by connecting an RS-232 cable to the pro- jector’s Serial Control connector. Specific RS-232 commands can be found in the Service and Support section of our website and in the Appendix.

connect monitor cable

connect RS-232 cable

The projector can be managed by networking software through its Network

(RJ-45) connector. Detailed instructions on this feature can be found on our connect CAT-5 cable website.

Network

8

Image 9

Contents IN42 Trademarks Battery Safety InformationTable of Contents Important Operating Considerations for Safety Projector components and features front Product specificationsIntroduction Included ItemsConnector Panel Positioning the projector Connecting a computer Required computer connectionsOptional computer connections Connect monitor cable Connect RS-232 cable ? No computer image? Get help on Displaying a computer imageAdjusting the image Connecting a video device Standard video connectionsOptional video connections Displaying a video image Page Troubleshooting your setup Status indicator light behavior and meaningShutting down the projector Only startup screen appears ScreenImage clear and not cropped Page Color Lamp won’t turn on, Temp light is lit Lamp won’t turn on, Lamp light is litLamp may need to be replaced Lamp turns on Still having problems? Using the keypad buttons Using the remote controlTroubleshooting the remote Using the audio Troubleshooting audioConnecting external speakers Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Picture menu TingsService menu Advanced settings Settings menu Screen Save Capture New Startup Logo Blank Screen Network Language Lens Type Service menu Service Info Maintenance Cleaning the lensReplacing the clock batteries Replacing the projection lamp Page Using the security lock Cleaning the dust filterAppendix Projected image sizeWidth Image Feet/m Screen Size Inch/m Minimum Maximum Projection Distance inch/m122/3.1 236/6.0 Communication Configuration RS-232 commandsCommand Format Setting ValueLimitations Error ConditionsINT at RW Disable Enable IR Receiver front IRF at RW MPH at RW 128 896 512 Izontal Page Ntsc Index Page XGA